Horsepower limitations of Corvette FPR/Filter?
#1
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Aug 2002
Location: Readsboro, VT
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I picked up a Corvette fuel pressure regulator / filter for my LS swap in my IROC, but I started wondering if I'm going to run into limitations due to it's inlet/outlet size.
What are the horsepower limits of this filter? I'm expecting to be in the range of 475-500 RWHP, and was planning on perhaps adding a 150 shot on top of that.
Any other fuel system considerations I should be looking at for this horsepower level? I know my stock TPI pump will need to be upgraded, but what about the regulator/filter, and what about fuel line sizes?
What are the horsepower limits of this filter? I'm expecting to be in the range of 475-500 RWHP, and was planning on perhaps adding a 150 shot on top of that.
Any other fuel system considerations I should be looking at for this horsepower level? I know my stock TPI pump will need to be upgraded, but what about the regulator/filter, and what about fuel line sizes?