Which wiring harness for a Ls Swap?
Which wiring harness for a Ls Swap? no matter what car or truck that your putting it in.
which harness or who's harness do you suggest?
who's got the better deal?
thanks
Ed
which harness or who's harness do you suggest?
who's got the better deal?
thanks
Ed
oh i dont have a harness and im really not patient enough to build one from scratch.
might have someone that could help build one,i just dont have a harness currently.
was looking at this guys harness.
http://www.larryselectricsite.com/LS1.html
might have someone that could help build one,i just dont have a harness currently.
was looking at this guys harness.
http://www.larryselectricsite.com/LS1.html
If you absolutely have to buy a 'built' harness, you can't go wrong with a Speartech harness, give John a call, tell him what you're working on. He is always here offering assistance.
Mike
Mike
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: May 2008
Posts: 9
Likes: 0
From: Waterloo IL
I personally have not used one of Larry's harnesses, but I have been to his shop a couple of times. He was very helpful and knowledgeable and was willing to talk as long as I wanted without the guarantee of a sale. Not sure if that helps you out or not??
AJW
AJW
TECH Resident
Joined: Jun 2004
Posts: 841
Likes: 2
From: Tampa, FL
I melted down a bunch of pennies and made my own wire, stranded and twisted it by straining it through a calendar, then coated it with high temp insulation I made from composite plastics I had laying around, colored the wires as needed with food die, and then used all of that to build my own harness.
Assembled my own engine computer with old parts I had from Broken Pacman Machines, and an Apple IIe.
It's not that tough, just takes time, you guys should try it.
Assembled my own engine computer with old parts I had from Broken Pacman Machines, and an Apple IIe.
It's not that tough, just takes time, you guys should try it.
I melted down a bunch of pennies and made my own wire, stranded and twisted it by straining it through a calendar, then coated it with high temp insulation I made from composite plastics I had laying around, colored the wires as needed with food die, and then used all of that to build my own harness.
Assembled my own engine computer with old parts I had from Broken Pacman Machines, and an Apple IIe.
It's not that tough, just takes time, you guys should try it.
Assembled my own engine computer with old parts I had from Broken Pacman Machines, and an Apple IIe.
It's not that tough, just takes time, you guys should try it.
plug in connectors,fuse block,relays,nothing to start with at all.
which direction would you go?
even if you didnt have a Pacman machine,or Atari
Staging Lane
Joined: Feb 2010
Posts: 54
Likes: 0
I'm cheap, am modifying my own from the truck harness with the 6.0. In the past, I've used harness' in their entirety using ALL the donor componants, including VATS, not knowing how to do it nor where to start. It doesn't seem that hard now that I've jumped into doing my own. I say that, before I've gotten it together and the engine running...