6.0L out of 2007 Van?
Teching In
Joined: Mar 2009
Posts: 25
Likes: 0
From: Fredericksburg, va
It does... but there is a catch. In 2007 Chevrolet used both a standard 6.0 (lq4) in the trucks marked classic and they used the ly6 with the l92 heads and vvt in the "new style" trucks. I'm not sure in vans so you'd have to do some research. If you go to buy a ly6, it is found in the new style or smooth door trucks. I used car-part.com to get mine.. $1500 complete with harness. Only has 17k on it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
8th digit is a "U" so its a 6.0
I don't think the Express vans got VVT, since most of them were sold as work vehicles
easiest way to tellwhat you have would be to look at the front of the heads and look at the head casting number. if you have 823 you have LY6 w/L92 heads and VVT, if 317, you have LQ4.
VVT definately comes on "work" vehicles.
VVT definately comes on "work" vehicles.
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
Look for this type of timing cover
http://www.mastmotorsports.com/page....Camshaft&id=30
ALSO........ IIRC if you look at the pass. side rear of the block.... if its a LY6 it says gen IV as the LY6 is a gen IV and the LQ4 is a gen III It might even say it on the drivers side front too.
http://www.mastmotorsports.com/page....Camshaft&id=30
ALSO........ IIRC if you look at the pass. side rear of the block.... if its a LY6 it says gen IV as the LY6 is a gen IV and the LQ4 is a gen III It might even say it on the drivers side front too.
TECH Senior Member
Joined: Jul 2009
Posts: 8,032
Likes: 661
Look for this type of timing cover
http://www.mastmotorsports.com/page....Camshaft&id=30
ALSO........ IIRC if you look at the pass. side rear of the block.... if its a LY6 it says gen IV as the LY6 is a gen IV and the LQ4 is a gen III It might even say it on the drivers side front too.
http://www.mastmotorsports.com/page....Camshaft&id=30
ALSO........ IIRC if you look at the pass. side rear of the block.... if its a LY6 it says gen IV as the LY6 is a gen IV and the LQ4 is a gen III It might even say it on the drivers side front too.
