78 Datsun 280z-------------> 5.3 Build
#241
Well it started and ran for about 20 minutes today, went to eat, and it won't start now.
But its mechanically complete, so I put it on the ground.
And this happened.
This is as low as she goes. It trapped my 3.5" floor jack under the frame rail.
tomorrow going to the tuner to work out bugs
But its mechanically complete, so I put it on the ground.
And this happened.
This is as low as she goes. It trapped my 3.5" floor jack under the frame rail.
tomorrow going to the tuner to work out bugs
Last edited by STEEPSS; 04-22-2012 at 10:58 PM.
#243
TECH Fanatic
iTrader: (7)
It runs.
Minor wiring and vacuum leak issues.
Quick file upload several tweaks of the file.
Took it out for a quick datalog and it pulls really hard.
http://s704.photobucket.com/albums/w...8280ZLS1M6.mp4
Minor wiring and vacuum leak issues.
Quick file upload several tweaks of the file.
Took it out for a quick datalog and it pulls really hard.
http://s704.photobucket.com/albums/w...8280ZLS1M6.mp4
#245
So, as I assumed I would have to, I raised it up about 1.5". Its low, but quite drive-able.
I took it to my good friend, and lsx swap king aknovaman. He had a tune flashed to it, and we were on the road in less than a couple hours. I can't thank him enough!
This means that I'll make our annual cruise next weekend!!
I've put about 30 miles on it so far, and gave it its first bath in nearly two years.
Here are a couple pics I snapped before putting it to bed.
It still needs some small things, but the major stuff is taken care of!
I took it to my good friend, and lsx swap king aknovaman. He had a tune flashed to it, and we were on the road in less than a couple hours. I can't thank him enough!
This means that I'll make our annual cruise next weekend!!
I've put about 30 miles on it so far, and gave it its first bath in nearly two years.
Here are a couple pics I snapped before putting it to bed.
It still needs some small things, but the major stuff is taken care of!
Last edited by STEEPSS; 04-23-2012 at 12:06 AM.
#250
Thanks guys! Its been a long time coming, but I'm glad I took the time to do everything I did. She left me stranded yesterday - a piece of PVC i was using to join a radiator hose distorted and let the clamp loose. Put a piece of galvanized pipe in there and we were off to the races.
I almost forgot, I weighed it yesterday. With roughly a half tank it weighs 2750# Without me. With me, its about 2930.
Here's some pictures that my buddy snapped last night with his DSLR
http://www.kcsr.org/showthread.php?t=121609
and a video he made
http://www.youtube.com/watch?v=WN5b8W3csk4
Enjoy!
I almost forgot, I weighed it yesterday. With roughly a half tank it weighs 2750# Without me. With me, its about 2930.
Here's some pictures that my buddy snapped last night with his DSLR
http://www.kcsr.org/showthread.php?t=121609
and a video he made
http://www.youtube.com/watch?v=WN5b8W3csk4
Enjoy!
Last edited by STEEPSS; 04-24-2012 at 09:46 AM.
#254
nice job on the dash-- i have a small crack in mine and never thought of bedliner to get the texture back-- looks ok in the pics- how is it in person?
now if ls engines were around cheap 15 years ago i might have one in mine-- i was #2 on hybridz to do a 5.0 car after Dan in Fl..
i havent been on there in a long time -- was SCCA.
just wondering why you went thru all the work for that gastank and didnt use a stock 280z efi tank?
when the 5.0 dies i might consider this swap.. for an all alum ls engine for less weight.
now if ls engines were around cheap 15 years ago i might have one in mine-- i was #2 on hybridz to do a 5.0 car after Dan in Fl..
i havent been on there in a long time -- was SCCA.
just wondering why you went thru all the work for that gastank and didnt use a stock 280z efi tank?
when the 5.0 dies i might consider this swap.. for an all alum ls engine for less weight.
Last edited by cartel; 04-27-2012 at 10:26 PM. Reason: fix pic
#258
Located a rear end and axles a couple hours away. Gonna put a new u-joint in the PS axle to limp it to the salvage yard to buy parts lol. Trying to save some money on gas.
Other than some gut-wrenching sounds from the rear, the car did phenomenal yesterday on the cruise. I drove it 75 miles, and even got a few good races in. Raced a stock ls1 fbody, put about 4 cars on him from a 30-130 roll. Raced a heads/cam Trans am, he put about 2 cars on me from the same roll. Also raced a 600+ WHP c5 z06. He put about 3 cars on me. It definitely surprised some people, and put a lot of smiles on.
Other than some gut-wrenching sounds from the rear, the car did phenomenal yesterday on the cruise. I drove it 75 miles, and even got a few good races in. Raced a stock ls1 fbody, put about 4 cars on him from a 30-130 roll. Raced a heads/cam Trans am, he put about 2 cars on me from the same roll. Also raced a 600+ WHP c5 z06. He put about 3 cars on me. It definitely surprised some people, and put a lot of smiles on.