water pump
The 'best' way or the easy way? As far as the best way, twist & pull the hose fittings out of the pump, tap the holes NPT and screw in a nice set of plugs. For the easy, redneck way, simply loop a section of hose between the 2 fittings, attach with ugly hose clamps. Just my opinion.
Mike
Mike
Rhino, something that my Dad taught me when I was a young man, "it only takes a little more effort to do it right the first time". I've lived by that philosophy for over 45 years and it's served me well.
BTW, a good pair of Vise-Grips will get the hose fittings out of the water pump.
Mike
BTW, a good pair of Vise-Grips will get the hose fittings out of the water pump.
Mike
Trending Topics
Link to the U?
Edit- Here it is
https://ls1tech.com/forums/conversio...hose-loop.html
I am going to tap it and plug it.
Edit- Here it is
https://ls1tech.com/forums/conversio...hose-loop.html
I am going to tap it and plug it.
Last edited by ablakez28; Oct 30, 2010 at 04:37 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Thanks for the part number's I will now be doing this lol I looked in my tap kit the other day and My npt taps don't go up that big so by the time I bought new taps this route will be way more budget friendly
