nostixs

clears in my buddies 96 s10 u have to notch the frame for a/c though.....he isnt running ps ......hood clearance is tight due to a larger alternator....but the factory alternator clears just fine.

reedld

iTrader: (7)

My car has the F-body accessories....yes it clears...lower drivers side.

I read before I bought my car (done)...by time you swap the intake, accessories, and oil pan...you are time and money ahead buying a 346ci LS1. Of course...you could find all the parts real cheap...

Leon

Isolde

iTrader: (4)

Shouldn't be too difficult to find a used '97-'00 LS1 intake manifold for $50, that's what I paid for mine. You need the matching fuel rail, and that was another $50 in my case.
The '99-'05 truck intake can work in my Fiero swap, with a bit of finagling, but the decklid needs a wee bit of trimming. And the beauty cover is out of the question.

laytoncamaroz28

iTrader: (10)

well i meant the truck alternator. but are the car acc. relatively cheap?

kilrcady

iTrader: (1)

what about a C3 corvette?They say only f body acc and intake and oil pan

reedld

iTrader: (7)

here's a link from this site...one guy did do a 5.3 w/truck intake in a camaro...looks real nice.

https://ls1tech.com/forums/conversio...post-here.html

speedtigger

iTrader: (16)

I think you can put a tunnel ram under the hood of a shoe box!

6.0 1955

iTrader: (20)

Truck Acc. were an easy fit on my 55 sedan. The motor is carbd but truck intake would clear no problem.

6.0 1955

iTrader: (20)

Here is a crappy pic of the engine bay of my 55 with a carb'd 6.0 running the truck acc.