82 Fox Body 5.3 swap
#1
82 Fox Body 5.3 swap
Here is my fox I picked up to do a 5.3L/TH400 swap. The build wont start until I get back in the states, from what i was told the car has a Dana rearend and is already pretty much stripped out for a track car. I know it needs a bunch of work since it is pretty rough but the car was free. Can anyone chime in on what type of rear end is in this and will it be ideal for drag racing?
Free Parts (my father owns a salvage yard in south carolina so the big ticket items and odds and ends that nickle and dime ya will be free )
5.3L from 01 Silverado
TH400
Purchased Parts as of now
AJE K member
AJE TH400 Crossmember
AJE LS motor Mounts
Dynatech LS Swap headers
Misc AN fittings and hose
Edelbrock Victor Jr.
MSD 6010
AutoMeter Wideband
Summit Racing Fuel Pump
Fuel Pressure regulator
Parts needed (all i can think of right now...)
Holley 750 DP
Slicks
Shifter and cable
Free Parts (my father owns a salvage yard in south carolina so the big ticket items and odds and ends that nickle and dime ya will be free )
5.3L from 01 Silverado
TH400
Purchased Parts as of now
AJE K member
AJE TH400 Crossmember
AJE LS motor Mounts
Dynatech LS Swap headers
Misc AN fittings and hose
Edelbrock Victor Jr.
MSD 6010
AutoMeter Wideband
Summit Racing Fuel Pump
Fuel Pressure regulator
Parts needed (all i can think of right now...)
Holley 750 DP
Slicks
Shifter and cable
#2
TECH Senior Member
iTrader: (18)
Looks like all stock suspension that will have to be addressed, axle tubes and torque boxes need to be welded up, subframe connectors, you have a ton of work ahead of you. Might consider finding a roller thats been setup already for 1500-2k itll be well worth the money.
I paid 2k for mine(1400 after i sold parts i didnt need it came with. that was for a 93 coupe no rust at all, 4.10s, weld draglites with good slicks and skinnies, comp eng drag shocks, tubular kmember, trickflow girdle, ds safety loop, decent interior. i have a build thread on it.
I paid 2k for mine(1400 after i sold parts i didnt need it came with. that was for a 93 coupe no rust at all, 4.10s, weld draglites with good slicks and skinnies, comp eng drag shocks, tubular kmember, trickflow girdle, ds safety loop, decent interior. i have a build thread on it.
#4
If dad owns a junkyard can you put in a 6.0? I mean if all you are doing is racing the thing get the bigger cube motor im thinking. So what if it needs work it was a free car, you obviously know it needs work enjoy it. Love the florescent green "Cobra Stang" on the back of the car from the early 90's
#5
Well, my first choice was the 6.0L but he only has a few of those. He has an abundance of 5.3's so thats what im getting right now, if it blows then ill just get another one.
Trending Topics
#8
just a little update, this build has taken a major detour in direction....ill give ya a little hint, i just got off the phone with rob at modular turbo
I spend a bunch of money and only get a couple pictures of boxes.... ugh
it sucks being deployed....
1600$ box of parts and all i get was a free hat
boost gauge
AEM injector driver
HP Tuners Pro
MSD 2-step
MT Slicks
waiting on the turbo now, all the vbands and hoses
I spend a bunch of money and only get a couple pictures of boxes.... ugh
it sucks being deployed....
1600$ box of parts and all i get was a free hat
boost gauge
AEM injector driver
HP Tuners Pro
MSD 2-step
MT Slicks
waiting on the turbo now, all the vbands and hoses
#9
build progress update (pic heavy)
here are some build pics for you guys... found a 4 cyl. coupe for 400$ in pretty good condition so i wouldnt have to use that piece of junk i was originally going to use...
Last edited by FakeSnake; 08-06-2011 at 03:54 PM.
#17
Staging Lane
Join Date: Aug 2011
Location: South Carolina
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
kool build so far.. I'm pretty much doing the same thing.. picked up a 89 notch and a 2000 5.3 I'm on a tighter budget so im trying to make alot of my parts and the last thing i'll do is get the 76mm turbo.. I'll tag along on your build to help mine along.. so update
#18
Staging Lane
Join Date: Aug 2011
Location: South Carolina
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
have you thought any about changing the location of the altenator? all Im going to be running is the alternator and water pump off the crank and would like to mount it low so im trying to figure out what i'm going to do about that..
#20
gotta run it up there since im doing a truck manifold build... i need a cowl hood anyways to fit the throttle body and carb hat so ill just get a cowl big enough to squeeze the alternator under....