This has been driving me nuts. I talked to this company and cant find the e-mail or the name of them. They helped me alot and answered all my questions.

They were going to sell me a stand alone wire harness with a fuse block and fan wiring out the door for about $550. I only had to hook up 3 or 4 wires and that was it. Think it came with a clame shell for the fire wall too.

Anyone know what I'm talking about?

New car will be here saturday time to get moving.
thanks
jay

 

psi conversion? thats who im going with

 

Speartech?

 

PSI maybe there site is down. I wanted a true plug and play

Speartech charges way to much!

 

Jesse Bubb at wait4meperformance???

http://www.wait4meperformance.com/

 

Which is it you want?

 

If I only have to hook up a +12, ignition +12 and ground thats plug and play for me. If I have to make my own fuse box, relays and wire the fans up etc that nothing better than my stock harness.

 

Its them. Just have to figure out if they will sell me a harness for the fans or if I have to fab it up. Hoping I can just buy it.
jay

 

Jay give us a call 732-691-6531.

Jon

 

No matter what you're going to have to connect your fan relays, often the fuel relay too and gauges on top of the main 12v and IGN. Grounds should be ring terminals to be attached to the block somewhere, preferable out of sight for any harness worth talking about

 

If you have a stock harness, you can send it to Jesse at wait4meperformance.com, he will rework the stock harness to where it will a 4 wire hook up, just make sure you have and send them the fuse box and relays, if you dont have it then they can provide you with it for an extra fee.

 

Its chevythunder

 

Call Jon at PSI; he will hook you up with a true plug and play. Awesome customer service and quality.