1995 Mustang best place to order and??
06-21-2011, 11:01 PM
#1
Teching In
Thread Starter
Join Date: Apr 2010
Location: Tennessee
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
1995 Mustang best place to order and?? I want to install an ls1/t56 in my 95 mustang.I have done some searching............it looks like aje k member and dynatech headers are a start.Where is the best place to order these?
I do have a wrecked 98 T/A with a ls1/t56 but the throw out bearing was makeing noise and the slave cylinder was damaged.
Should I just order a stock master and slave and throw out bearing or is there something better??
Thanks in advance.
I do have a wrecked 98 T/A with a ls1/t56 but the throw out bearing was makeing noise and the slave cylinder was damaged.
Should I just order a stock master and slave and throw out bearing or is there something better??
Thanks in advance.
06-21-2011, 11:12 PM
#2
i got my aje kmember and trans xmember from jegs and it shipped FAST and for the same price.
i would definetly try dynatech because my kooks 5512 fit like absolute crap. jegs mnay have them as well.
if you are gonna do a clutch master i would try a tick if yout hink you can make it fit, or maybe a wilwood for a smaller profile one.
i would definetly try dynatech because my kooks 5512 fit like absolute crap. jegs mnay have them as well.
if you are gonna do a clutch master i would try a tick if yout hink you can make it fit, or maybe a wilwood for a smaller profile one.
06-22-2011, 05:57 AM
#3
Teching In
Thread Starter
Join Date: Apr 2010
Location: Tennessee
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply.I just ordered the aje k member and mounts from jegs. I am going to get those and test fit the engine. I am still not sure I am going t56.I do have a couple of 700r4,s that I might go with.Thanks again.
06-26-2011, 08:43 PM
#4
Teching In
Thread Starter
Join Date: Apr 2010
Location: Tennessee
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
A little set back today. Jegs did ship fast, I got them in two days.I removed the old k member and found I had to order the spring perches
O,well I still have plenty more do in the mean time while they get here.
O,well I still have plenty more do in the mean time while they get here.
06-27-2011, 03:24 AM
#6
Fk the perches, get a coil over kit. You'll thank yourself later. As far as the trans., depends on what your final goal is. If you want to go racing I say ditch the 6 speed, but if you're wanting a fun cruiser and not worried about fast then keep it.
Trending Topics
06-27-2011, 12:42 PM
#8
I guess if "fast" is considered a relative term. 
I've had plenty of both high hp/tq manual cars and auto cars. The auto always beats out the stick in the category of racing usefulness and effectiveness and the manual always beats out the auto in fun and driving experience/cruising. My .02
I've had plenty of both high hp/tq manual cars and auto cars. The auto always beats out the stick in the category of racing usefulness and effectiveness and the manual always beats out the auto in fun and driving experience/cruising. My .02
07-01-2011, 10:17 PM
#10
Teching In
Thread Starter
Join Date: Apr 2010
Location: Tennessee
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Fast shipping again from jegs.I got the perches wed. night. I got them installed but still need to mount the rack.
I wound up sick thursday
and missed work.In the morning I plan on getting back to it.
I am still not sure about the trans.I am going to test fit both in the am.
I wound up sick thursday
and missed work.In the morning I plan on getting back to it.I am still not sure about the trans.I am going to test fit both in the am.
