LTX --> LSX Conversion Sticky
#222
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
More like 6 years.... but who's counting?? LOL
The following users liked this post:
G Atsma (03-03-2023)
#224
TECH Resident
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Edit 3-21-2023: Tach is correct as listed, Ignition 3 and B/U lights connected.
Last edited by gjohnsonws6; 03-21-2023 at 10:55 PM.
#225
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am currently doing my 96 T56 and might be making a post soon once I determine exactly what is going on and can ask better questions. 96 C220 connector layout is different and I’m not finding too much on it. Checking for CPP, Ignition 3, and Neutral safety at the moment. I also might have the tach wrong with the 93-95 Pinouts compared to 96.
![](https://cimg7.ibsrv.net/gimg/ls1tech.com-vbulletin/1580x2000/20230320_172407_4ee64972514d483935995604911b57d285abc593.jpg)
#226
TECH Resident
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
- Blue PCM Pin 32 Gray CPP, C220 Pin B (LS)
Then making everything final at the fender and I’ll be set.
EDIT: possibly found gray clutch anticipate on C230 A (LT dash side) Which is the 5 volt reference on the LS C230 pin A engine side.
Last edited by gjohnsonws6; 03-21-2023 at 10:42 AM.
#228
TECH Resident
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
https://www.camaroz28.com/forums/lt1...s-help-873857/
My C230 dash side:
![](https://cimg3.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1316/3d406c30_8c78_4af1_8d72_90db2f6d7679_be62cf3563bf61fbe051da8411554ef48358e94c.jpeg)
Last edited by gjohnsonws6; 03-21-2023 at 10:41 PM.
#229
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is where I found it, I’ll trace it out soon and report back with my findings. I’d like if it was hooked up but understand that it will work without as well. If this is the case then I’ll be wondering about the 5 volt next. Hopefully this all works and will be a good contribution to the thread.
https://www.camaroz28.com/forums/lt1...s-help-873857/
https://www.camaroz28.com/forums/lt1...s-help-873857/
1996-1997
Cavity Wire Color Description
A Grey (Manual) Clutch anticipate signal
(V6 VIN S only-1996, VIN K only-1997)
#230
TECH Resident
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](https://cimg8.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1504/aed9813b_59ca_41fd_8fcf_56a6db072c1a_91435ea25cfce731a0c8759845e283ec877690e5.jpeg)
#231
TECH Resident
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
@the_merv Any ideas on this one? I put blue LS PCM connector pin 58 green to C230 pin C (LT dash). However purple serial data on K at 230 on LT side is there as well, this is a little confusing and also found this in my search.
Edit: Moved pin 58 green to pin K purple at C230 dash side = pin 2 at OBD 2 diagnostic plug
https://ls1tech.com/forums/lt1-lt4-m...-question.html
Edit: Moved pin 58 green to pin K purple at C230 dash side = pin 2 at OBD 2 diagnostic plug
https://ls1tech.com/forums/lt1-lt4-m...-question.html
Last edited by gjohnsonws6; 03-27-2023 at 01:14 AM.
#232
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
@the_merv Any ideas on this one? I put blue LS PCM connector pin 58 green to C230 pin C (LT dash). However purple serial data on K at 230 on LT side is there as well, this is a little confusing and also found this in my search.
Edit: Moved pin 58 green to pin K purple at C230 dash side = pin 2 at OBD 2 diagnostic plug
Edit: Moved pin 58 green to pin K purple at C230 dash side = pin 2 at OBD 2 diagnostic plug
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)