Grand Cherokee Swap
#1
Grand Cherokee Swap
I have been out of the LSX game for a couple years and looking to get back. I currently own a 2005 Jeep Grand Cherokee. It started it's life as a complete base model 4.7L 4x4 Laredo. Since owning it I have done a complete SRT8 exterior overhaul and now looking to do something in the engine compartment. I would love to do a 5.3 iron block swap and toss on a turbo. Does anyone have any experience on this swap? Or possible any information on what it will take to make this happen?
#2
Try a search. Someone was on here a year or so ago with one.
#5
TECH Junkie
iTrader: (1)
8 year old thread.....
Here's a nice Grand Wagoneer -- https://bringatrailer.com/listing/19...nd-wagoneer-5/
Here's a nice Grand Wagoneer -- https://bringatrailer.com/listing/19...nd-wagoneer-5/
The following users liked this post:
mytmouz (04-04-2020)
#6
TECH Senior Member
1st time posters.... gets 'em every time...
Trending Topics
#9
Ls swap
For the tranny I went with a 4l60e and I only had to redrill the hole for the mount on the stock cross member it was easy I even used the stock jeep transmission lines and for the harness i did it myself too (easy) I had it routed how stock truck runs it but I took everything apart cause im going to re route everything probably inside under the dash or on the left corner of the engine bay
#10
A little help, please...
I'm actually looking to see if anyone can tell me if I could replace the oem block on a 2007 wk with one from an 08. I'm going nuts, lol. It looks like there's no information.....
#11
TECH Senior Member
You might be better off checking with an actual Jeep forum for what you want. This forum is totally about LS engine swapping.