pretty sure the Hummer Pan works fine with the Team Z K-member...
the fbody one only misses being useable by about half and inch, the hummer pan should clear by several inches

 

No way would I run a stock pan on any thing planning to be raced.

The oil control and pick up location of the stock pans is not suficcent. By the time you buy the things to try and make a f body pan work you are at the price of a moroso.

Every part on my car has required some kind of mod to make it work better on the car.

Tim

 

Is that Moroso pan available in a kit with everything needed?

 

No. The pickup needs work also the height was off on mine and the screen was way to restrictive.

Tim

 

The Moroso pickup was that far off? Man that thing is over $100 and needs work?

 

my only reason for using the stock pan currently, is for budget...
right now, the car is no where near close to race... though, I have raced with this pan and did not have any major issues...
and I honestly dont need to buy the moroso pan to do the rest of the work on the car to get it driveable...
I plan on buying a moroso pan before I go down the track in the mustang as it should be considerably faster than what I was running last year in the camaro
I had a 10.97 in a 3800lb car on motor, and I had several aborted passes due to some electrical issues, and some lack of traction when I tried to spray...
never had a good clean pass on the giggle gas due to multiple problems.....
then I decided to go foxbody...so none of that mattered any more.

 

I like mine 1/4 off the pan and a open screen. debured and smoothed up the inside of the box while I had it cut apart.

Tim