93 POS notchback build
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
got my control arms installed
and my fuel pump mounted
might get a new fitting and try to make the pump level with the sump. i dont need to but im not trying to have some ******* **** come on here and complain that something is less than perfect with my build....
and my fuel pump mounted
might get a new fitting and try to make the pump level with the sump. i dont need to but im not trying to have some ******* **** come on here and complain that something is less than perfect with my build....
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
rear suspension is in for the most part. still have to square it up and weld in my ARB but thats nothing really. this week im putting in the 3.27s and spool and strange 35 spline axles ive had sitting around since november lol.
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
rear suspension is done. all i need to do is get the rear end squared in the car and i can weld the tabs on for the ARB. 3.27s, spool and 35 spline axles are in. 1350 conversion is done as well. im ordering my driveshaft tomorrow. im pretty ****** excited to get this thing going. oh yeah and i got my street lites and steamrollers on too 
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
mounted my battery tray. ran my main power cable. installed my driveshaft. put in some 5mm wheel spacers in the rear. ran my tranny cooler lines. car is literally 2-3 hours away from running. i need to buy a battery and run power and grounds and its done. i cant believe how fast its come together the last couple of weeks. today is the first day i havent worked on it in a month it seems.
