93 POS notchback build
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
trannys in the car. that ******* AJE crossmember was a bitch!! i had to elongate both holes to get the tranny to sit straight. guess thats a fairly common problem with them.
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
hp tuners. ive only tuned DSMs in the past so im leaning heavily on my buddys for that. i damn well sure learn quick though.
Nice I was thinking about picking up the hp tuners as well. I am used to tuning the ford ecm with the tweecer and quarterhorse. Not sure how much different they are but the concept should all be the same.
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
i finished my f body/foxbody sender hybrid.
it works too. its in the tank and tank is in the car. i have to pull it back out to run my return line but its pretty much done. i started the cage finally. main hoop is in and mocked and were doing the measurements for the halo and front bars this week. i also ordered my new turbo from jose at forced inductions today. its an S480 with the 92mm turbine and i upgraded to the billet compressor wheel while i was at it. i said **** it. this should be the last turbo i ever have to get for this project. ill get some more pics of the progress as we go. ive been slammed at work and havent touched the car, other than this last weekend, for a month.
it works too. its in the tank and tank is in the car. i have to pull it back out to run my return line but its pretty much done. i started the cage finally. main hoop is in and mocked and were doing the measurements for the halo and front bars this week. i also ordered my new turbo from jose at forced inductions today. its an S480 with the 92mm turbine and i upgraded to the billet compressor wheel while i was at it. i said **** it. this should be the last turbo i ever have to get for this project. ill get some more pics of the progress as we go. ive been slammed at work and havent touched the car, other than this last weekend, for a month.
Last edited by LILHEMI; May 13, 2013 at 07:00 PM.
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
just got two of these off of ebay
gonna order mightymouses catch can this week and get that all taken care of. this should make everything so simple. i got the cage half in and mocked so far should have it completely finished in the next two weeks. got a plan with my boy to have the car running by july 8th so we can have a month to tune it for hot august nights.
gonna order mightymouses catch can this week and get that all taken care of. this should make everything so simple. i got the cage half in and mocked so far should have it completely finished in the next two weeks. got a plan with my boy to have the car running by july 8th so we can have a month to tune it for hot august nights.