tex1978

iTrader: (3)

Details on that alternator wiring. Did you keep the Ford alt or go with the LS one? Looking for details on battery, starter, alt, etc.

1bad03snake

iTrader: (16)

Pm me your email. Ill shoot you some pics

1bad03snake

iTrader: (16)

Got the roller rockers bolted down, crank bolt tightened up, hole drilled in the firewall for the harness. Ill work on the inside wiring as i get time. Im on day shift all weekend boo

alexcoreas

iTrader: (1)

Subscribed. Love these builds

1bad03snake

iTrader: (16)

It has been fun so far. I think i can just bypass the NSS by using a fuse to jump it across. Ill give it a try this weekend

1bad03snake

iTrader: (16)

My jumper wire idea didn't work. Back to the drawing board

LS1PUNK

iTrader: (5)

Do you need David's number?

I would ask him but Im pretty sure I would leave/forget something.

1bad03snake

iTrader: (16)

I figured out the nss/trigger wire problem. I got the starter to work today. Hopefully I'll crank the car up tonight

fst_ls1

iTrader: (1)

very nice build!

1bad03snake

iTrader: (16)

SHE RUNS!!!!!

But vats is on and I broke a fitting in my trans... friday ill get the vats removed

rob69zombie

iTrader: (7)

Looks awesome. Are those headers coated or painted? I can't see spending 600+ for painted headers.

1bad03snake

iTrader: (16)

Painted. I bought them used for 400.00.

1bad03snake

iTrader: (16)

A quick trip to harbor freight and texas performance and i have the new fitting, o2 bungs, and the adapters for my autometer cluster

1bad03snake

iTrader: (16)

Here is my fuse panel I mounted it where the factory computer use to be. I have plenty of room for the ECU under the dash

To power up my harness/Relays I tapped into this wire off the ignition switch

I kept trying to get the red/blue trigger wire to work.. I tapped into the white/pink and ran that to the small terminal on the starter. No more need to worry about the NSS.

I tapped into the Green wire and ran that to my harness fuse box fuel pump relay

Damn the carpet is nasty

Pulled the carpet and found .80 woohoo

Installed the dash. Im waiting on my Florida50 gauge cluster to come in

A bottle of simple green and a pressure washed did wonders... I removed the jute since it was stained and smelled like crap. It is pretty heavy so Im happy with another weight reduction.

bigbadblack93z

iTrader: (8)

It's crazy how dirty the carpet gets. Mine looked like I was rinsing coffee out of it for 20 minutes.

Did you order the complete cluster or the bare one? I have all the gauges already just need to get a panel.

LS1PUNK

iTrader: (5)

Looking good man!

Quick question. The shifter mount plate, does it touch the tail housing of the trans?

1bad03snake

iTrader: (16)

I ordered the complete cluster and speedo sensor. It was 800 shipped. No use in using a camaro cluster for a water temp and tac.

1bad03snake

iTrader: (16)

Nope it has 3"ish of clearence I can get a pic tomorrow for you Im back on night shift

LS1PUNK

iTrader: (5)

Please, mine is touching so Im not sure what im gunna do.

1bad03snake

iTrader: (16)

I got pics. Ill post them tonight.