LS1PUNK

iTrader: (5)

I have a zex wet kit pilled for 150 sitting in my closet if ur interested.

Two bottles, Bottle heater, and brackets.

1bad03snake

iTrader: (16)

You can make the ford rack work with the gm pump. I went with a manual rack for weight savings and it was less stuff to buy.

1bad03snake

iTrader: (16)

Send me text tomorrow. I'm working nights I should be up by noon. Also It will be a while before I hook up my speedo. When I decided to crawl under the car again and hook up the autometer sensor. I found out my trans speedo hole was filled in. Im going to have to remove the tail shaft and see what they did and if I can put it back to stock


Matt

LS1PUNK

iTrader: (5)

I'm out on the rig, won't be back till the 2nd.

1bad03snake

iTrader: (16)

No rush bro. Hit me up when your back

Deuce2185

subscribed nice cars guys

1bad03snake

iTrader: (16)

I picked up a nitrous kit the other day. I made a bracket out of a do not enter sign I found. I'm starting with a 150 shot. I'm going to use the button on my shifter to activate it

toxic99

Grats on getting it on the road, looks and sounds good. I was wondering if you got any times on the motor yet? Or maybe weighed it?

86lxnotch

iTrader: (3)

just an fyi IF your autometer speedo is electric they make a gps adapter for it. im getting one for mine here sometime soon. i believe its a 3 wire hookup.....power,ground, signal to speedo and thats it. also hang an antennea. think is like $200 or so

1bad03snake

iTrader: (16)

Yea my speedo is electric I thought about using the GPS unit but my cluster came with the old style sender. The plug for my speedo is leaking so Im going to pull the tail shaft tomorrow and replace it with a new sending unit. If everything works out this week I'll go to the track on friday. Im working night shift so I dont have a lot of time to work on it during the day.

Also my 6.0 mainfolds came in. Im researching the rest of the parts I need for a single turbo
any suggestions let me know

Gee101

iTrader: (8)

cool project, can't wait to hear how it does at the track.

1bad03snake

iTrader: (16)

For some reason the driver side has no spark or fuel. I checked the grounds and and fuses. I'm not seeing and frayed or cut wires. I'll mess with it this week and hopefully get it figured out before Friday

LS1PUNK

iTrader: (5)

Can u pm me a link about that gps adapter thingy?

86lxnotch

iTrader: (3)

go on summit, type in autometer 5289 and it'll bring it right up for you

LS1PUNK

iTrader: (5)

Thanx.

86lxnotch

iTrader: (3)

no problem!

1bad03snake

iTrader: (16)

I picked up 6.0 manifolds 2.5" v bands and a bunch of bends with a t4 flange. I'm going to start mocking up the hot side on my ls1. I'm going to run a on3 performance t76 .96 ar and buy an eBay intercooler/ cold side piping kit. My dad is getting the vbands welded to the manifolds so one those are ready I'll begin the rest of the fab work

jaywill

iTrader: (5)

Nice build !

jvert

iTrader: (1)

Awesome build! Im in the process of finding an lsx/t56 drivetrain for my 93 notch.

ssowell

I know this is an old post but I just started my swap. Do you have a detailed document of your wiring under the dash? I got the dash off today and I was looking around kind of lost. I'm doing the Florida 50 cluster also and need to keep the a/c I'm not sure what I should and shouldn't be cutting. Of course, I want all my illuminated lights too.