91 fox coupe 4.8 build
#83
Send me text tomorrow. I'm working nights I should be up by noon. Also It will be a while before I hook up my speedo. When I decided to crawl under the car again and hook up the autometer sensor. I found out my trans speedo hole was filled in. Im going to have to remove the tail shaft and see what they did and if I can put it back to stock
Matt
#89
TECH Apprentice
iTrader: (3)
Join Date: Dec 2011
Location: Malvern, PA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
just an fyi IF your autometer speedo is electric they make a gps adapter for it. im getting one for mine here sometime soon. i believe its a 3 wire hookup.....power,ground, signal to speedo and thats it. also hang an antennea. think is like $200 or so
#90
Yea my speedo is electric I thought about using the GPS unit but my cluster came with the old style sender. The plug for my speedo is leaking so Im going to pull the tail shaft tomorrow and replace it with a new sending unit. If everything works out this week I'll go to the track on friday. Im working night shift so I dont have a lot of time to work on it during the day.
Also my 6.0 mainfolds came in. Im researching the rest of the parts I need for a single turbo
any suggestions let me know
Also my 6.0 mainfolds came in. Im researching the rest of the parts I need for a single turbo
any suggestions let me know
#97
I picked up 6.0 manifolds 2.5" v bands and a bunch of bends with a t4 flange. I'm going to start mocking up the hot side on my ls1. I'm going to run a on3 performance t76 .96 ar and buy an eBay intercooler/ cold side piping kit. My dad is getting the vbands welded to the manifolds so one those are ready I'll begin the rest of the fab work
#100
Registered User
Join Date: Oct 2012
Location: Arlington TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I know this is an old post but I just started my swap. Do you have a detailed document of your wiring under the dash? I got the dash off today and I was looking around kind of lost. I'm doing the Florida 50 cluster also and need to keep the a/c I'm not sure what I should and shouldn't be cutting. Of course, I want all my illuminated lights too.