My notch is in the Car Craft Engine Swap Guide
#1
My notch is in the Car Craft Engine Swap Guide
I was pretty shocked to see this on the shelf this morning! I have been waiting for it to show up in a normal issue for the last few months.
A big thanks to everyone that helped out with info, a few sponsors from this site & some deals from the classifieds on here.
I have some pretty good friends that helped me a ton on this deal!
Thanks to Doug from CC for a cool spread in the magazine.
A big thanks to everyone that helped out with info, a few sponsors from this site & some deals from the classifieds on here.
I have some pretty good friends that helped me a ton on this deal!
Thanks to Doug from CC for a cool spread in the magazine.
#6
Thanks! Here is a thread with some pics.
https://ls1tech.com/forums/forced-in...gle-turbo.html
It is just cool to walk up to the newstand & grab a mag with your car in it. I wasn't expecting my car to be in this issue, so I about shiit myself..
https://ls1tech.com/forums/forced-in...gle-turbo.html
It is just cool to walk up to the newstand & grab a mag with your car in it. I wasn't expecting my car to be in this issue, so I about shiit myself..
#7
Trending Topics
#12
Thanks, I don't have much video of the car, but will get some more.
Thanks!
Not that I know of. I will try to scan it & see how it looks.
Thanks!
Thanks!
Not that I know of. I will try to scan it & see how it looks.
Thanks!
#15
Thanks!
I don't ming not having PS, but have only driven on skinnies too. AC would be nice, but takes up too much room.
I don't ming not having PS, but have only driven on skinnies too. AC would be nice, but takes up too much room.
#16
Yeah, going to try to work around things as best I can on the AC. This thing has tons more room that some of the other projects I have worked on. I just found out I have a shop with a mandrel bender RIGHT down the street! Will probably be expensive, but I figure anything I can mock up I can have him bend for me!