5.3 cutty

iTrader: (2)

i have serched high and low for this fuel sender.1987 montie carlo 4.3 tbi. i cant find it .anyware. Ware are u guys getting the sender from and whats the averg cost. thanks guys was all happy to come home to my parts to find out its the wrong sender.

LS1MCSS

iTrader: (18)

Rockauto.com. $188

5.3 cutty

iTrader: (2)

could i use spectra fg1569 or acdelco fl0207 ?? its the same as the ones that racetronix sales for a grand natoinal with the an fittings on the sender.

bigmandengo

iTrader: (21)

http://www.racetronix.biz/itemdesc.a...G7W255&eq=&Tp=

comes with a walbro...

85GPLEf41

iTrader: (4)

I have my eye on one of those too just wondering either how to adapt the evap portion or delete it and keep it smog legal too...

G-Body

iTrader: (4)

That thing is sweet I like that its stainless too. I just wish it was setup for dual pumps, I need a sender for my next swap but a single pump won`t keep up with what I have planned.

BTW the factory sending unit is available from spectra premium PN fg156a and can be found from ~ $80 and up. amazon, ebay, autopartswarehouse, etc

jmd

iTrader: (4)

I had just started emailing with a friend a few months ago about some parts for an upcoming carb to EFI conversion and going GN sender (we had always gone 4.3 Monte) when I saw this posted back then. How can you beat, stock, stock but w/ AN, and AN + Walbro? Yay for aftermarket stepping up to the plate.

tta656

iTrader: (5)

here you go-----need deep pockets for this...

http://www.racetronix.biz/customkiti...kc=DPFS-G7&eq=


better plan is buy factory sending unit from amazon like you said,and buy 2 walbro's and the coupler that racetronics sells for cheap...

http://www.racetronix.biz/itemdesc.a...DPC-G7&eq=&Tp=