Ya i said it now lets see some!!!

 

Yea yea i know I've just mainly been gathering parts getting closer still need a few more pieces

 

Bump!!!

Updates????

 

This thread should be helpful . . .

https://ls1tech.com/forums/conversio...o-lt1-car.html

Please try to post a lot of pics during your swap !

Dave

 

Well I know I kinda let this thread can go dead but I have been gathering parts I ended up finding a really good deal on a parts car so I'm going to pull all the wiring out of a 2000 ss I have almost everything I need now should start back on it here real soon

 

Thanks..I posted that on the other page..lol

 

If you decide that you dont want to do the wiring, we specialize in F-Body cars. I can build you a plug and play harness with the factory F-body grommet, heat tape, clips, vacuum line. Here is a thread with one of my 24x conversion harnesses, which is really close to what you need. Sensor locations and some minor things are different. But you will get the idea.

https://ls1tech.com/forums/lt1-lt4-m...onversion.html

Even if you dont choose to get one, just post your questions and ill do my best to help. Im super busy, but I always try and make time for you guys.

 

going to send the wiring to bp automotive to have him mod it for me

 

Got the motor in this weekend

 

I will have the wiring harness back from Bill tomorrow I'm so excited to get the car finished

 

It lives yes

 

Very good sir! Now we just need some pics!

 

Definately can't beat Bill's harnesses. Cleaner & better than OEM.
BTW, did you change out your steering rack? A must for LSx swaps into LTx cars.

 

K member steering rack a-arms Spindles and brakes are all from a 98-02 car

 

So the car move on its own power tonight the wife drive it down the block for the first time in almost year and a half