Steve68

iTrader: (23)

got a line on a 4L80E picking it up soon, might need a rebuild most likely not!!!!

On my way to thr Turkey rod run, needing some parts, one fender,dash panel, carpet kit,

Steve68

iTrader: (23)

Picked up a nice steering wheel for $30 and a carpet kit, goin gto do a little work on the car today,

green96ta

iTrader: (11)

subscribed. Looks like this will be a very interesting thread! That car is in good shape too, you have a great base to work from!

Imp709

How to u subscribe to a build?
I see the termed but cant find where I would subscrib

OOOOPPPPs

I found out Thank U

Steve68

iTrader: (23)

Thanks Bill, all the sheet metals bad, bad body work before I bought it, I have everything except one fender, all the floors are good to, keep watching!!

Steve68

iTrader: (23)

Have the relays all wired up, more dynamat installed, I'll post some pic later,

tearing into the back seat. going to have it recovered to match the Scat seats, also have to dye the new sunvisors and the kick panel vents, there pretty dingy,

DC True

nice build

Steve68

iTrader: (23)

wired up the relays, now to make a harness,



Scat seats mounted, since I'm 5'9' there on the 2nd hole, and I have no headroom issues,



adding more dynamat, front half's finished, now to pull the rear seat and work on the metal divider,



Pulled the lower kick panel, my vent **** has issues, so I POR'ed the inside add some closed cell foan and then Dynamat on top, to totally seal it up,



painted,



Hurst Auto Stick III, and my temp panel,



some new MSD parts to replace the old HEI,