p0740 after m6>a4 swap
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
p0740 after m6>a4 swap
As soon as I shift out of park, the CEL pops on. Everything seems to be working as it should besides the converter not locking up. Ohmed the solenoid out and it was in spec. Everything seems to have been wired correctly including the brake switch. I do not have a park/neutral switch wire in yet, but should have the switch on the factory shifter wired soon. Didnt think the absence of the p/n switch would somehow affect this code but could be wrong. Anyone have any ideas or things to check?