New A/c Bracket option
#1
New A/c Bracket option
Just saw this on the holley website, forgive me if this has already been posted, but I thought it looked like a nice option for high mount AC that has an OE look... Couldn't find it for sale anywhere, so who knows how much they will want for it, or when it will be available...
Anyway, here's the link:
http://www.holley.com/20-133.asp
they also make a high mount Alternator bracket... not sure exactly when you would use that, as I would think hood clearance would be an issue:
http://www.holley.com/20-135.asp
Anyway, here's the link:
http://www.holley.com/20-133.asp
they also make a high mount Alternator bracket... not sure exactly when you would use that, as I would think hood clearance would be an issue:
http://www.holley.com/20-135.asp
#4
Boy that is nice. Some good info in their installation guides. The alternator mount looks just like the vette to me, but their kit will support any belt spacing. They have a good guide what works with what too.
I put the holley part number into jegs. The AC bracket kit $130 and the alternator bracket number came up blank on both jegs and summit. Must be too new.
I put the holley part number into jegs. The AC bracket kit $130 and the alternator bracket number came up blank on both jegs and summit. Must be too new.
Trending Topics
#8
Looks like it was inspired by the S-10 a/c bracket swap. It looks like a stout piece but a lot of the OEM R4 brackets had a support brace or two off the back of the compressor to the block or head for additional rigidity.
The 21-3 "installation kit" is another $100 didn't see prices for the 21-1 or 21-2 kits.
Not knocking it, nice to have a OEM appearing bolt-on bracket option.
The 21-3 "installation kit" is another $100 didn't see prices for the 21-1 or 21-2 kits.
Not knocking it, nice to have a OEM appearing bolt-on bracket option.
#12
Teching In
iTrader: (1)
Join Date: May 2009
Location: west georgia
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
http://www.alangrovecomponents.com/LS.htm
I worked on the home made version of the high mount today.
I worked on the home made version of the high mount today.
#13
looks like that may fit low on the passenger side with some home made brackets. I was looking for something smaller than the 508 or 7 which hit my subframe on my 71 camaro