G body with BRP headers with 4L80
08-19-2012, 06:27 PM
#3
TECH Apprentice
Join Date: Apr 2011
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Dang now I'm mad, the only company i could find that made bolt in swap headers at the time of my swap was BRP.. 850 bucks.. So I had to "massage" a brand new set of pacesetters for an f body.. i would have gladly paid the cost of the Hedmans to not have to do so again.
08-20-2012, 11:07 AM
#5
Dang now I'm mad, the only company i could find that made bolt in swap headers at the time of my swap was BRP.. 850 bucks.. So I had to "massage" a brand new set of pacesetters for an f body.. i would have gladly paid the cost of the Hedmans to not have to do so again.
May be an option from BRP too but not posted if it is.
08-21-2012, 01:23 AM
#6
the hedman listed above (45010) is 1 3/4 and the ones I'm wondering about are 1 7/8 primaries...on the hedman site, both sizes list compatible with 4l60 and 4l65 but no mention of 4l80. Just wondering if anybody is runing the 1 7/8 with the 4l80?
Trending Topics
08-21-2012, 09:20 PM
#9
i dont see the difference being too much between the 1-3/4 and the 1-7/8 headers. the routing is going to be the same, just the primaries are going to be a tad bigger
