91/88 mustang reswap 6.0/T76
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I finished up the rear brakes and swapped springs back to the stock with a coil cut off. I also adjusted the coil overs, installed my scott rod panels and installed the pushrods, rocker arms, driver shaft, intercooler, pass side turbo header. I ordered most of the fuel system fittings and turbo oil lines.
#30
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm running into a few issues. The turbo sits kinda high so I can either cut a hole in the hood (not going to happen) or lower the kmember and trim the merger to get the 1 1/4" clearance. I'm going to test fit a buddy's T70 and see if it fits better. If so I'll run it and make up the difference with meth
#37
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I finally get a day off and now I'm sick.... I drilled the holes in my gas tank where my sump will fit. Mounted my battery box in the trunk. I ordered a t70 turbo since the 76 doesn't fit without more header modifications. Tomorrow I plan of finishing up the front brake lines, running the battery cables, and maybe get the shifter installed.