'00 S10 4.8, 4L80, P1SC and Ford 8.8" swap
#68
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
found a lower radiator hose after an hour of searching at autozone that fit pretty good considering the radiator neck is 1.75" and the water pump is 1.5"
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213843_zpsb8ccd1d6.jpg)
pieced together an upper after tapping the upper neck on the water pump around to point towards the radiator
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213900_zps191badd8.jpg)
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213804_zps9d8752b6.jpg)
Truck somewhat cleaned up... needs a good waxing
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213843_zpsb8ccd1d6.jpg)
pieced together an upper after tapping the upper neck on the water pump around to point towards the radiator
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213900_zps191badd8.jpg)
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_213804_zps9d8752b6.jpg)
Truck somewhat cleaned up... needs a good waxing
![](http://i155.photobucket.com/albums/s286/arushformore/20130306_214006_zpsb3da19bb.jpg)
#69
Teching In
Join Date: Dec 2011
Location: Charleston,SC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looks Good Jesse. Keep us posted. Nice talking to ya tonight.Bring that thing home next time yo come. Oh yeh, you bringing the Metro back or is that another LS project? lol
#72
#75
#77
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Some super sloppy ****, found a relatively flat cross member at the pick and pull chopped it in the middle cut to length and welded some c channel to the inside of the frame