1st gen F-body Question
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How did you guys mount your 98-02 fbody ls1 radiator/fans? I cut out the boxes on the core support but instead of reinventing the wheel, I'd figure I'd ask and see what everyone else did as far as holding the top and the bottom in place against the core support. Pictures are always useful, and any help would be greatly appreciated.
Thanks guys!
Tony
Thanks guys!
Tony
#2
TECH Senior Member
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You are trying to use a 98-02 F-body Radiator and Fan.. Right ?
I just mounted it as it would be for my Nova, which is pretty much the same as the 1st gen F-Body. replaced the upper Rubber and just use a standard 3 hole Radiator Support.
For the Bottom, I drilled a hole to allow the Radiator bottom Pin and Gromet to seat on the bottom of the Radiator Support.
I did open up the Left side of the Radiator Support to accomadate the larger size of the Radiator.
You can see my work in my project thread... follow the link in my Sig.. Page #4, post #70
https://ls1tech.com/forums/conversio...-ls1-a4-4.html
BC
I just mounted it as it would be for my Nova, which is pretty much the same as the 1st gen F-Body. replaced the upper Rubber and just use a standard 3 hole Radiator Support.
For the Bottom, I drilled a hole to allow the Radiator bottom Pin and Gromet to seat on the bottom of the Radiator Support.
I did open up the Left side of the Radiator Support to accomadate the larger size of the Radiator.
You can see my work in my project thread... follow the link in my Sig.. Page #4, post #70
https://ls1tech.com/forums/conversio...-ls1-a4-4.html
BC
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You are trying to use a 98-02 F-body Radiator and Fan.. Right ?
I just mounted it as it would be for my Nova, which is pretty much the same as the 1st gen F-Body. replaced the upper Rubber and just use a standard 3 hole Radiator Support.
For the Bottom, I drilled a hole to allow the Radiator bottom Pin and Gromet to seat on the bottom of the Radiator Support.
I did open up the Left side of the Radiator Support to accomadate the larger size of the Radiator.
You can see my work in my project thread... follow the link in my Sig.. Page #4, post #70
https://ls1tech.com/forums/conversio...-ls1-a4-4.html
BC
I just mounted it as it would be for my Nova, which is pretty much the same as the 1st gen F-Body. replaced the upper Rubber and just use a standard 3 hole Radiator Support.
For the Bottom, I drilled a hole to allow the Radiator bottom Pin and Gromet to seat on the bottom of the Radiator Support.
I did open up the Left side of the Radiator Support to accomadate the larger size of the Radiator.
You can see my work in my project thread... follow the link in my Sig.. Page #4, post #70
https://ls1tech.com/forums/conversio...-ls1-a4-4.html
BC