Cam,intake,exhaust 5.3/4LXXE '85 C10! PIC HEAVY!!!
#101
On The Tree
Thread Starter
Join Date: Oct 2012
Location: ARIZONAA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
well for the trans dipstick i used a lokar and I have no throttle cable My moor is DBW and I didn't get the AC in it doesn't fit between the frame and the motor so I will be using the holley top mount ac bracket
#102
On The Tree
Thread Starter
Join Date: Oct 2012
Location: ARIZONAA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
SLowly getting it all back together! I got the motor and trans in last weekend and found that my A\C compressor doesnt fit in the lower position so I'll have to get a top mount sometime after the truck it running.
Painted up my inner fenders too!
will the header still seal with this little tiny gap?
new paint VS old
headers are definitely fun -_-
Painted up my inner fenders too!
will the header still seal with this little tiny gap?
new paint VS old
headers are definitely fun -_-
Last edited by LSx '85 C10; 08-31-2013 at 08:18 PM.
#103
On The Tree
Thread Starter
Join Date: Oct 2012
Location: ARIZONAA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Mounted my radiator today and finished up my trans cooler lines and fuel lines, finished my harness should be running this week and I will also be doing my own exhaust this week as well, I think my trans cooler hose may end up being in the way of the exhaust though so something else might need to be done with that.