2003 Hyundai Tiburon conversion to the LS1 Project.
04-26-2004, 09:37 PM
#21
Copy & Paste Moderator
Originally Posted by The Demond
Okay for all of you who don't like the idea of the 20'' spinners, maybe you should look at them first:
http://www.superbuytires.com/wheels_...=Gladiator+SP6
http://www.superbuytires.com/wheels_...=Gladiator+SP6
Worse than I though.
--VIP1
04-29-2004, 03:18 PM
#24
Teching In
Thread Starter
Join Date: Mar 2004
Location: Jacksonville, AR
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
This is the husband, about the spinners, I understand about the spinners, but I do like spinners and to see them on a basically newly/custom designed tiburon, that would be a different s. Besides this is basically going to be a show car and hardly ever raced. If so I will not be using spinners to race the car with, I will probably be getting some deep dish 10'' 17 or 18'' wheels to race it with. But for show it will have the spinners. Once the project finally starts, I will be taking digital pictures of every step that I go through from start where it is now to finish. My wife and I will keep you all posted.
The Demond
The Demond
04-29-2004, 06:03 PM
#25
I'll bet money this project will never get finished, I hope you are a professinal chassis builder, and have ALOT of $$$ to waist, it would allmost be easier to take a TA and shorten the drive shaft and chop it in half, weld back together w/ proper wheel distand and fab up a tiburon body on it!
05-01-2004, 01:11 AM
#26
Teching In
Thread Starter
Join Date: Mar 2004
Location: Jacksonville, AR
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Assassin
I'll bet money this project will never get finished, I hope you are a professinal chassis builder, and have ALOT of $$$ to waist, it would allmost be easier to take a TA and shorten the drive shaft and chop it in half, weld back together w/ proper wheel distand and fab up a tiburon body on it!
11-17-2011, 07:14 PM
#28
01-12-2021, 07:59 AM
#30
