Show your trunk set up w/Impala Tank on GM A-bodies!
06-10-2013, 06:17 AM
#1
Show your trunk set up w/Impala Tank on GM A-bodies! I'm trying to decide how I want to close the hole in my 71 Cutlass floor from the Impala tank. Would love to see pictures of those that have done it w/a removable section (so you can still access the fuel pump/sending unit). I've seen a few on search, but I'm betting there are more. Yes I want to steal, uhm, borrow, your great ideas!
Thx!!
Thx!!
06-10-2013, 12:13 PM
#3
The Filler Neck and Cap.
Modified the Mounting pads to give the tank a level seating pad.
Mounted and side clearance.
I trimed the frame about 1/4" for about 9" on each side.
The Access Cover and Cut hole.
The Fuel feed, Return and Vent
That should about cover it
BC
Modified the Mounting pads to give the tank a level seating pad.
Mounted and side clearance.
I trimed the frame about 1/4" for about 9" on each side.
The Access Cover and Cut hole.
The Fuel feed, Return and Vent
That should about cover it
BC
06-17-2013, 12:23 PM
#4
Here are the mods I made to my tank: https://ls1tech.com/forums/8709100-post317.html
I'll take some pics of my trunk tonight. I just welded up the floor so it has a hump in it now, but no access panel. Dropping the tank really isn't a huge issue for me.
I'll take some pics of my trunk tonight. I just welded up the floor so it has a hump in it now, but no access panel. Dropping the tank really isn't a huge issue for me.
