84blaze

I got my plate frame and a billet air cap from Phil at Philbuilt Designs a couple days ago:



The quality is unreal.

Tig

AWESOME...............
So bad ***, one day I will have an LS powered 2dr 2wd 1st gen blazer. Yeah, I'm only a little jealous, hah.

Great job man

84blaze

I ended up purchasing the following for my intake:

4.00" - 4" Straight: http://www.ebay.com/itm/4-4-0-Inch-102mm-Silicone-Straight-Coupler-two-T-Bolt-clamps-Black-USA-/261266323297?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3cd4afb761

4.00" - 90* Elbow: 90* Elbow

4.00" - 45* Elbow: http://www.ebay.com/itm/4-4-0-Silicone-Coupler-hose-45-degree-elbow-Black-102mm-two-T-bolt-clamps-/271259296637?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3f2850637d

Air Filter:Spectre - HPR9615K

I will use a piece of 4.00 Aluminum tubing as the intake. It will be very similar design to Hotwires intake:



I realize the silicone 4 ply couplings I bought are OVERKILL, especially with the stainless t-clamps, as I am not boosted. They should be delivered within the next week or so so I'll post pictures when I go pick them up.

I also purchased:

CPW - Engine Management Fuse Block Assembly and some LS1 Fan Pigtails

Energy Suspension - 3.3162G Control Arm Bushing Set

84blaze

I got the last few missing parts to my build:

Hydroboost Unit with all hydraulic lines - From a 04 Yukon






Master Cylinder w/ reservoir - From a 95-05 S10 Blazer or Pickup







MAF Sensor - From a 00-02 6.0L V8 equipped vehicle

84blaze

I'm going to leave these here for reference:

Part 1:

Part 2:

Part 3:

Part 4:

Part 5:

Part 6:

Part 7:

84blaze

Went and grabbed my parts from the post office.

http://www.ebay.com/itm/4-4-0-Inch-102mm-Silicone-Straight-Coupler-two-T-Bolt-clamps-Black-USA-/261266323297?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3cd4afb761, http://www.ebay.com/itm/271259305190?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648, and http://www.ebay.com/itm/4-4-0-Silicone-Coupler-hose-45-degree-elbow-Black-102mm-two-T-bolt-clamps-/271259296637?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3f2850637d




Air Filter: Spectre - HPR9615K





CPW - Engine Management Fuse Block Assembly and some LS1 Fan Pigtails











Energy Suspension - 3.3162G Control Arm Bushing Set

84blaze

I went to the Auto wreckers and picked up an OBD II Diagnostic Port from a NBS Silverado. While I was there I pulled a 2nd gen coolant overflow tank with the computer mount and a cruise control module from the NBS Silverado but the yard wanted way too much so I left it there.

OBDII Port

bk2life

sweet project, any updates?
and how's school?

Tig

In for updates

84blaze

Hey guys,

Sorry I never updated this thread - I ended up focusing on finishing up the thread on S10forum. The truck has been running and driving for about 6 or 7 years now and I love it.

Most of the photos dont work anymore because of Photobucket but here's the link anyways: https://www.s10forum.com/threads/pro...e-swap.519642/

by https://www.flickr.com/photos/154177305@N03/, on Flickr

by https://www.flickr.com/photos/154177305@N03/, on Flickr

by https://www.flickr.com/photos/154177305@N03/, on Flickr

by https://www.flickr.com/photos/154177305@N03/, on Flickr

by https://www.flickr.com/photos/154177305@N03/, on Flickr

And this is my current project that I've shifted fosus to since the Blazer - it also has a 6.0 LQ4.

by https://www.flickr.com/photos/154177305@N03/, on Flickr

JayinMI

I follow both. lol

BTW, I see you're having the same problem on here that I did. When you paste from Flickr, if you don't delete the second URL tag, it posts duplicate pics.

Jay