1962 Bel Air 4 door cruiser project.
02-21-2014, 08:57 PM
#42
Staging Lane
Thread Starter
iTrader: (4)
Join Date: Oct 2010
Location: Spokane Wa.
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Finally had a break today with the weather and trailered the ol'girl to get the front end aligned.
As you can see we also cut 1 full wrap on the new front springs and this worked out to 1-5/8" lower than before... which is good enough for the girls I go with.
Next up:
-remove the nasty old fuel tank and all fuel lines.
-cut out the trunk tub.
-weld small tabs to rear end for the stainless disc brake lines.
-weld in new trunk tub.
-install new stainless fuel tank and stainless fuel lines.
Within the next 3 weeks my built 200R4 trans/converter and acc. will be here.
Slowly getting things ready to install the L-33.
L8R
As you can see we also cut 1 full wrap on the new front springs and this worked out to 1-5/8" lower than before... which is good enough for the girls I go with.
Next up:
-remove the nasty old fuel tank and all fuel lines.
-cut out the trunk tub.
-weld small tabs to rear end for the stainless disc brake lines.
-weld in new trunk tub.
-install new stainless fuel tank and stainless fuel lines.
Within the next 3 weeks my built 200R4 trans/converter and acc. will be here.
Slowly getting things ready to install the L-33.
L8R
