5.3 in a 65 impala
TECH Resident
Joined: Mar 2012
Posts: 821
Likes: 4
From: Elkridge MD
Yes, I put a 2002 5.3 in my '65 Impala. Turned out the motor was bad, and I replaced it with an LS2.
There were several obstacles, but none that were crazy hard. I was able to use the GM (Hummer) oil pan, but it hangs low. My exhaust hangs low too, so I raised the engine some to fix that. Because of that, I couldn't run the truck intake (not like I wanted to anyway) otherwise the hood wouldn't close.
If you're looking for headers, you can use the Dynatech LS swap headers for a 67-69 Camaro. They will clear the steering box.
I used the common ebay swap plates. I think I paid $30 for them.
I had to have the driveshaft shortened, and a different yoke added to it so that it would fit into the 4L60e.
Other than that, the hardships I had were unrelated to the LS swap. Check out my build thread here:
https://ls1tech.com/forums/conversio...-5-3-swap.html
You will also find Kwhizz's '66 Impala build thread very helpful:
https://ls1tech.com/forums/conversio...onversion.html
There were several obstacles, but none that were crazy hard. I was able to use the GM (Hummer) oil pan, but it hangs low. My exhaust hangs low too, so I raised the engine some to fix that. Because of that, I couldn't run the truck intake (not like I wanted to anyway) otherwise the hood wouldn't close.
If you're looking for headers, you can use the Dynatech LS swap headers for a 67-69 Camaro. They will clear the steering box.
I used the common ebay swap plates. I think I paid $30 for them.
I had to have the driveshaft shortened, and a different yoke added to it so that it would fit into the 4L60e.
Other than that, the hardships I had were unrelated to the LS swap. Check out my build thread here:
https://ls1tech.com/forums/conversio...-5-3-swap.html
You will also find Kwhizz's '66 Impala build thread very helpful:
https://ls1tech.com/forums/conversio...onversion.html
Thread Starter
Teching In
Joined: Oct 2013
Posts: 12
Likes: 0
SuperDave, thank you so much for your help. And Wow! Your creativity is awesome. Can't wait to started on my project. I plan on doing a frame off as well, replacing floor pans, etc... Did you have to change any of your accessories/brackets? My 5.3 is coming out of an avalanche and I am worried it may sit too high.
Thread Starter
Teching In
Joined: Oct 2013
Posts: 12
Likes: 0
SuperDave, thank you so much for your help. And Wow! Your creativity is awesome. Can't wait to started on my project. I plan on doing a frame off as well, replacing floor pans, etc... Did you have to change any of your accessories/brackets? My 5.3 is coming out of an avalanche and I am worried it may sit too high.
TECH Resident
Joined: Mar 2012
Posts: 821
Likes: 4
From: Elkridge MD
SuperDave, thank you so much for your help. And Wow! Your creativity is awesome. Can't wait to started on my project. I plan on doing a frame off as well, replacing floor pans, etc... Did you have to change any of your accessories/brackets? My 5.3 is coming out of an avalanche and I am worried it may sit too high.
TECH Resident
Joined: Mar 2012
Posts: 821
Likes: 4
From: Elkridge MD
haha believe me, I know all about slow builds. Coming up on two years for me and I'm still nowhere near done. I'm excited to see your build thread though. the '65 Impala is one of my dream cars. Since I can't afford a Viper or Aventador, I had to settle on the big brick.
Trending Topics
TECH Fanatic
Joined: Jul 2008
Posts: 1,570
Likes: 173
haha believe me, I know all about slow builds. Coming up on two years for me and I'm still nowhere near done. I'm excited to see your build thread though. the '65 Impala is one of my dream cars. Since I can't afford a Viper or Aventador, I had to settle on the big brick.
Ken
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Resident
Joined: Mar 2012
Posts: 821
Likes: 4
From: Elkridge MD
Thread Starter
Teching In
Joined: Oct 2013
Posts: 12
Likes: 0
Ok guys, I ended up passing on the 5.3 and picked up an LS1 out of a 2001 camaro. Going to go ahead and mate it with the 4l60e. I am really new to this process so your patience is greatly appreciated. I am trying to figure out the best way to supply my 65' impala with fuel. I've heard that I can use a fuel tank from a 1995/96 impala/caprice. Do you have any thoughts on this? And would a Walbro 255 fuel pump work along with a c5 corvette fuel filter/regulator?? Lastly, any idea on which type of fuel lines to use. I suppose in a nutshell, i need to understand the best fuel plumbing process i should use.
