Pure Automotive's FR-SS, Modified LS2 / T56 Swap, 2013 Scion FRS - Video Inside!
#1
Teching In
Thread Starter
Join Date: Oct 2013
Location: Millersville, MD
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Pure Automotive's FR-SS, Modified LS2 / T56 Swap, 2013 Scion FRS - Video Inside!
Hey guys,
We finally got our LS swapped 2013 Scion FRS started up yesterday, so I thought I'd share the video and some pictures!
The facts:
2013 Scion FRS
3,200 miles on chassis
LS2 From 2007 Cadillac CTS-V
T56 From 2006 Pontiac GTO
Dual ECU Setup: FRS ECU For All Required Functions on the chassis, tuned on ECUTEK Engine Management. CTS-V ECU For engine control, tuned on HP Tuners VCM Suite.
LSX-R Comp Cam
Comp Lifters, Push Rods, Trunions
GM Head Gaskets
ARP Head Studs
Dual Valve Springs, Titanium Retainers
Still have some odds and ends to iron out but it's getting close!
Startup Video:
We finally got our LS swapped 2013 Scion FRS started up yesterday, so I thought I'd share the video and some pictures!
The facts:
2013 Scion FRS
3,200 miles on chassis
LS2 From 2007 Cadillac CTS-V
T56 From 2006 Pontiac GTO
Dual ECU Setup: FRS ECU For All Required Functions on the chassis, tuned on ECUTEK Engine Management. CTS-V ECU For engine control, tuned on HP Tuners VCM Suite.
LSX-R Comp Cam
Comp Lifters, Push Rods, Trunions
GM Head Gaskets
ARP Head Studs
Dual Valve Springs, Titanium Retainers
Still have some odds and ends to iron out but it's getting close!
Startup Video:
Trending Topics
#8
Launching!
iTrader: (4)
Join Date: May 2010
Location: asheboro, nc
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Freaking awesome!!
Should be a killer drift car now lol
I do feel sorry for the I.r.s
Toyota/Subaru, probably didn't take in count of somebody smarter then them to put a V8 in there car lol
Should be a killer drift car now lol
I do feel sorry for the I.r.s
Toyota/Subaru, probably didn't take in count of somebody smarter then them to put a V8 in there car lol
#10
TECH Senior Member
iTrader: (7)
Also, please remove that junky *** Russell fitting off the fuel rail unless you want that gorgeous car to be burned down to the ground. Take that rail and have a -6 fitting welded to it.
Andrew
Andrew
#12
Teching In
Thread Starter
Join Date: Oct 2013
Location: Millersville, MD
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The factory ECU and body side harness remain the same. The GM ECU controls the powertrain and shares a handful of wires with the factory body harness.
#13
This is the new improved/replacment fitting.
http://static.summitracing.com/globa...-644113_xl.jpg
http://www.summitracing.com/search/b...=efi%20adapter
http://static.summitracing.com/globa...-644113_xl.jpg
http://www.summitracing.com/search/b...=efi%20adapter
#14
Teching In
Thread Starter
Join Date: Oct 2013
Location: Millersville, MD
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
This is the new improved/replacment fitting.
http://static.summitracing.com/globa...-644113_xl.jpg
http://www.summitracing.com/search/b...=efi%20adapter
http://static.summitracing.com/globa...-644113_xl.jpg
http://www.summitracing.com/search/b...=efi%20adapter