Need a little help with Wiring harness
Thread Starter
Teching In
Joined: Mar 2013
Posts: 24
Likes: 0
From: Lancaster, South Carolina
Need a little help with Wiring harness I'm using a 98 LS1 F-body wiring harness for my LQ swap into my 94 Formula (owned it for 7yrs) and got the LQ9 for a steal.
On Connector C100 I'm missing or can't find wires D (Traction Control Active), G ( Power Feed to Ignition Fuse #11), and k (power feed from injector fuse #10)
On Connector C210 I'm missing or can't find wires
B (Ground feed to fuel pump relay)
C (Power Feed From PCM BAT fuse to PCM)
D (feed from fuel pump and fuel pump relay to prime connector)
On Connector C220 I'm missing or can't find wires
D (Spark Retard request)
E (Throttle Position Sensor signal (EBTCM))
F (Serial data signal)
J (Fuel Pump Relay)
On Connector C230 I'm missing or can't find wires
C (Diagnostic request signal)
G (Power feed from PCM ignition fuse #5)
K (Automatic Torque converter clutch control)
I'd send it to SparTech if I had the money and time. But had to pay part of fall semester classes out of pocket and start school next week.
Your help would be greatly appreciated.
On Connector C100 I'm missing or can't find wires D (Traction Control Active), G ( Power Feed to Ignition Fuse #11), and k (power feed from injector fuse #10)
On Connector C210 I'm missing or can't find wires
B (Ground feed to fuel pump relay)
C (Power Feed From PCM BAT fuse to PCM)
D (feed from fuel pump and fuel pump relay to prime connector)
On Connector C220 I'm missing or can't find wires
D (Spark Retard request)
E (Throttle Position Sensor signal (EBTCM))
F (Serial data signal)
J (Fuel Pump Relay)
On Connector C230 I'm missing or can't find wires
C (Diagnostic request signal)
G (Power feed from PCM ignition fuse #5)
K (Automatic Torque converter clutch control)
I'd send it to SparTech if I had the money and time. But had to pay part of fall semester classes out of pocket and start school next week.
Your help would be greatly appreciated.
