1971 impala lsx
Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
OKAY,
SO I FOUND OUT MY FAN PROBLEM
I'm running duel fans stock f body ones. and i have a painless really kit..
and i blew the temp fan try on sensor.. do you know of any other good brand for fan em sensors?
I'm running as least wiring as possibly right now to save the battery until i get a 160 amp or more
SO I FOUND OUT MY FAN PROBLEM
I'm running duel fans stock f body ones. and i have a painless really kit..
and i blew the temp fan try on sensor.. do you know of any other good brand for fan em sensors?
I'm running as least wiring as possibly right now to save the battery until i get a 160 amp or more
Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
I like Denso Iridium plugs. Just get the ones for your application and they will come pre-gapped.
For oil use a quality synthetic, Amsoil is excellent but expensive. I like using AC Delco filters, Wix is good too.
Don't waste your money on MSD coils, you don't need them.
Andrew
For oil use a quality synthetic, Amsoil is excellent but expensive. I like using AC Delco filters, Wix is good too.
Don't waste your money on MSD coils, you don't need them.
Andrew
if i can think of anything else ill ask.
750 for those msds
lolokay i should use full synthetic correct. sorry I'm so used to old 350s so I'm new to these motors and want to take good car of it.
what kind of plug wires do you use? stock? mine are the ones with the metal boots by the manifolds
thanks....
if i can think of anything else ill ask.
750 for those msdslol
okay i should use full synthetic correct. sorry I'm so used to old 350s so I'm new to these motors and want to take good car of it.
what kind of plug wires do you use? stock? mine are the ones with the metal boots by the manifolds
if i can think of anything else ill ask.
750 for those msds
lolokay i should use full synthetic correct. sorry I'm so used to old 350s so I'm new to these motors and want to take good car of it.
what kind of plug wires do you use? stock? mine are the ones with the metal boots by the manifolds
You don't have to use synthetic oil, but it's better (whatever that means).
Andrew
Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
should i stay carb or go efi
whats the pros and cons and remember m on a limited budget.
should i get a painless harness and swap just my engine over to FI
SHOULD I GET A EFI CARB?
what do you guys think or what did you guys prefer with your set ups
ill rock the carb until i have fund but i really wanna do the full 4L60/ 4L80 OR 700r4 INSTEAD OF MY BUILT turbo 350 transmission,
but all cases may be different so explain what i could befit from it besides better gas milage
i just don't wanna spend anymore $$$ on my parts i want to spend it on $$$ on gas and drive the bad boy
__________________
whats the pros and cons and remember m on a limited budget.
should i get a painless harness and swap just my engine over to FI
SHOULD I GET A EFI CARB?
what do you guys think or what did you guys prefer with your set ups
ill rock the carb until i have fund but i really wanna do the full 4L60/ 4L80 OR 700r4 INSTEAD OF MY BUILT turbo 350 transmission,
but all cases may be different so explain what i could befit from it besides better gas milage
i just don't wanna spend anymore $$$ on my parts i want to spend it on $$$ on gas and drive the bad boy
__________________
Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
I like AC Delco wires. I got the red ones. They don't come with the metal boots, but you can reuse your metal boots. Hit them with a wire wheel and they will have a cool brushed finish since they are aluminum.
You don't have to use synthetic oil, but it's better (whatever that means).
Andrew
You don't have to use synthetic oil, but it's better (whatever that means).
Andrew
YUPPPP ILL DO THAT FORSURE!!.. thanks for the tip.
if i have any more questions ill ask,, not trying to bother you thank for all the help brotha
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
ANYONE NEED STICKERS I MAKE THEM FOR A LIVING PM ME IF YOU NEED SOME
ANYTING
ANY COLOR I DO CUSOM DESIGNS SEND ME YOUR IDEAS TO MY EMAIL
--------> [email]chevyryder58@gmail.com
I CAN DO replica packages anything any year camaro corvette trans am ws6 pontiac chevy
any car
we use vinyl it protects paint and removes easy.
i can do stripes full wraps anything you can think off
let me know
PMPMPM PM PM ME for any questions regarding this i need money to build and finish my car
ANYTING
ANY COLOR I DO CUSOM DESIGNS SEND ME YOUR IDEAS TO MY EMAIL
--------> [email]chevyryder58@gmail.com
I CAN DO replica packages anything any year camaro corvette trans am ws6 pontiac chevy
any car
we use vinyl it protects paint and removes easy.
i can do stripes full wraps anything you can think off
let me know
PMPMPM PM PM ME for any questions regarding this i need money to build and finish my car
Andrew
Thread Starter
On The Tree
Joined: Nov 2014
Posts: 107
Likes: 0
From: Tacoma, WA
i figured out if you have a custom set-up to use both front and back steam lines to the water pump or radiator I'm having issues with dealing with steam at the moment it charges and gets hot way to way with little help from the steam adaptor.
any ideas ?
any ideas ?