93 s10
93 s10 I had a build thread on here for this but I changed direction on it, sold most of the parts and lost picture links so im just starting over...
its a 93 s10 I drove my senior year of high school. Parked it with around 60k miles. Got married, had a son, bought a house, remodeled house, ect... After 12 years of sitting in a storage garage and tinkering every now and then its in the garage at our house and im off to work..
As it sits now.
Using these wheels...
From the picture it looks like it fits fairly well....
it doesnt..
Going to start the mini tub this coming week if work allows it. Using a S&W back half kit( 4-link) all under the stock bed floor.
using a 6.0 iron block, getting forged internals, and some other odds and ends for bOOst. Its backed by a 4L80E.
If you look real close behind the bikes you can make out the 8.8 thats going in it haha
I'll try and keep up with pictures as I go with this thing.
its a 93 s10 I drove my senior year of high school. Parked it with around 60k miles. Got married, had a son, bought a house, remodeled house, ect... After 12 years of sitting in a storage garage and tinkering every now and then its in the garage at our house and im off to work..
As it sits now.
Using these wheels...
From the picture it looks like it fits fairly well....
it doesnt..
Going to start the mini tub this coming week if work allows it. Using a S&W back half kit( 4-link) all under the stock bed floor.
using a 6.0 iron block, getting forged internals, and some other odds and ends for bOOst. Its backed by a 4L80E.
If you look real close behind the bikes you can make out the 8.8 thats going in it haha
I'll try and keep up with pictures as I go with this thing.
Wish I could get more done, Work is making it hard to get anything accomplished.
Did manage to get the front hubs to the machine shop to get turned down so it hasnt been a complete bust.
Did manage to get the front hubs to the machine shop to get turned down so it hasnt been a complete bust.
Tires came, 275/40's are 315/35's
Also started the front brake conversion.
Took the stock A arms off to make room for the tubular arms also.
lowers are still under construction ha
and this is how it sits....
Also started the front brake conversion.
Took the stock A arms off to make room for the tubular arms also.
lowers are still under construction ha
and this is how it sits....
They're C5 zo6 brakes. I still have to make the caliper mounting bracket. Im still waiting on the hubs to get back from the machine shop so when I get those i'll finish it up.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo No real big update but.. I found a 4L80E in a local craigslist ad. After talking to the guy and making offers I picked up up for $150!!! Weather here sucks right now (snow snow snow) so he hasnt got it out of the truck yet. Gave him $75 deposit so im pretty pumped I got it so cheap!
After looking at lower control arms and prices and not wanting to spend more on them than I already have I decided to use the ones I had and alter them a little...
When I get my coilovers ill make the mount in the lower arm for them to bolt to.
Also I went and got my trans today...
When I get my coilovers ill make the mount in the lower arm for them to bolt to.
Also I went and got my trans today...
Registered User
Joined: Mar 2015
Posts: 2
Likes: 0
Sub'd as I'm gathering parts for a 1st gen s10 lsx swap. Did the brake swap come as a kit or are you piecing it together? I noticed you said you were going 8.8 in the rear. Are you narrowing it or is it narrower than your stock rear?
Glad to see another 1st gen getting the swap. It wasnt a kit. I bought the brake pieces and made the brackets. I am using an 8.8 in the rear. not sure yet on width as I haven't got the mini tub done to see just what I need. however with that said, the stock axle is 54.5" and the 8.8 is 59.5" but im running an 11" rear wheel so its hard to tell what ill need to do with it.
finally picked up my hubs from the machine shop sat.
before...
after..
I still have to drill the hubs and put new studs in but I had to see what it looked like together.
ride height
before...
after..
I still have to drill the hubs and put new studs in but I had to see what it looked like together.
ride height
