87 Fox Body LS Turbo
#203
TECH Fanatic
iTrader: (5)
a friend of mine have the engine & th350 trans..i'm just waiting on him to bring it 2 me i don't have a truck right now "macco"
5.3
243 heads w/new springs & valves ,full roller arms
head studs
Ls9 head gaskets
stage 2 turbo cam "mayhem"
double roller timing chain
ls1 oil pump
5.3
243 heads w/new springs & valves ,full roller arms
head studs
Ls9 head gaskets
stage 2 turbo cam "mayhem"
double roller timing chain
ls1 oil pump
Last edited by jaywill; 09-21-2015 at 05:50 PM.
#204
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
a friend of mine have the engine & th350 trans..i'm just waiting on him to bring it 2 me i don't have a truck right now "macco"
5.3
243 heads w/new springs & valves ,full roller arms
head studs
Ls9 head gaskets
stage 2 turbo cam "mayhem"
double roller timing chain
ls1 oil pump
5.3
243 heads w/new springs & valves ,full roller arms
head studs
Ls9 head gaskets
stage 2 turbo cam "mayhem"
double roller timing chain
ls1 oil pump
I'm glad I have another truck again.
#206
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#208
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#210
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#213
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#215
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
I got the driveshaft custom made from Precision Shaft Technologies. They were very helpful and a very fast turnaround. Only took a couple days, and everything looked and fit perfectly. I just called and gave them the measurements that they needed, and let them know what trans and rear end I had and they took care of the rest.
http://pstds.com/
#216
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Couple more parts starting to come back together..
Getting the oil catch cans put back on and getting the waste gate put on.
Had to extend the dump tube in order to clear the water pump. Going to wrap it as well.
Bracket for the ECU is in.
Fabbing up the mounts for the flip down license plate bracket to access the switch and posts.
Getting the oil catch cans put back on and getting the waste gate put on.
Had to extend the dump tube in order to clear the water pump. Going to wrap it as well.
Bracket for the ECU is in.
Fabbing up the mounts for the flip down license plate bracket to access the switch and posts.
#220
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts