Is this fitting going to work?
http://www.jegs.com/i/Earls/361/AT991944/10002/-1
Trending Topics
For the high side at least you need high pressure hydraulic, so it is a very thick hose wall. I used Earl's hydraulic hose and hose-ends for my custom hoses and adaptors like Dave had shown or the ones sold by Purechoicemotorsports. The hydraulic products are good for about 2500 psi, I think. where standard AN hoses much less.
Bring the stuff to a hydraulic shop and they can get you setup or at least tell you what is feasible.
The Best V8 Stories One Small Block at Time



