LSA in a 65 Impala stock hood ?
#2
Truck intake fits
As a reference. Truck intake fits with 3/4" ataptors.... but barely. With a few adjustments in motor mount position/ height I think the LSA is doable.... just remember clearance up top creates clearance issues on bottom. Oil pan will hang below the crossmember. Could interfere with the center link. Your exhaust and the steering box...
#4
You will need to get a Holley 302-1 Pan for starters.........and Adapter pates for the motor mounts to raise the engine slightly for cross member clearance ......I have some in stock if you are interested........I have that set-up in my 66 Impala and a Edelbrock Supercharger with out any issues
https://ls1tech.com/forums/conversio...onversion.html
Ken
https://ls1tech.com/forums/conversio...onversion.html
Ken