67 camaro LS1 Best way to retrofit radiator out of the donor car
#21
I wound up using the Spectra CU-1485 from all the info I looked up. It only cost $85. This I’m my opinion is a great match for the car. It is thicker then the OE radiator. I used the original fans from the donor car. Using the original mounting points, I used slotted angle iron from each point top to bottom For each side which I got from a Home Depot.
Here is it complete...
Slotted angle iron from Home Depot
Original mounting. I drilled it to quarter-inch
Through bolted to the Radiator
Outside point of view
Conversion adapter to radiator
Conversion adapter to radiator
Mounting point driver side
Mounting point passenger side
Showing the Mounting point
Installed
Here is it complete...
Slotted angle iron from Home Depot
Original mounting. I drilled it to quarter-inch
Through bolted to the Radiator
Outside point of view
Conversion adapter to radiator
Conversion adapter to radiator
Mounting point driver side
Mounting point passenger side
Showing the Mounting point
Installed
#24
TECH Senior Member
Ya gotta LOVE a simple solution to a problem! No more problem! lol