LQ9 LS/ 86 C10 Swap need a little help
09-23-2018 | 05:09 PM
#1
Thread Starter
Teching In
Joined: Sep 2018
Posts: 2
Likes: 0
From: oklahoma
LQ9 LS/ 86 C10 Swap need a little help I am doing a LS swap on my C10 and need a little help, here's what i have on hand.
LQ9 short block 403cid all forged bottom
4" stoke, 6.125 rods, JE Dish pistons -26.4, Comp Cam grind for boost
Comp Ultra 1.8 rockers, Comp short travel lifters, Comp Cam double spring set, Ferrea valves on 243 ported and polished heads.
Single Precision 76mm Turbo 1150hp rated. I am think of running the LS gold box from EFI source for fuel management on 80lb injectors.
I have looked at a couple of 102mm intakes but have not decided yet.
Question is what best options do i have for coils, I will be remote mounting them and I will need to run tall covers for clearance.
Any suggestion on what coils?
LQ9 short block 403cid all forged bottom
4" stoke, 6.125 rods, JE Dish pistons -26.4, Comp Cam grind for boost
Comp Ultra 1.8 rockers, Comp short travel lifters, Comp Cam double spring set, Ferrea valves on 243 ported and polished heads.
Single Precision 76mm Turbo 1150hp rated. I am think of running the LS gold box from EFI source for fuel management on 80lb injectors.
I have looked at a couple of 102mm intakes but have not decided yet.
Question is what best options do i have for coils, I will be remote mounting them and I will need to run tall covers for clearance.
Any suggestion on what coils?