Harness conversion question
Thread Starter
Joined: Jun 2014
Posts: 1,241
Likes: 47
From: Noblesville, IN
Harness conversion question I'm going through the process of converting my harness from an 08 tbss for a swap into a dakota. I'm keeping the 4l70e and the associated wiring.
One wire I ran into is on the plug for the park/neutral switch. the last pin is labeled "crank voltage" and is circuit 639. Goes back to the fuse box. Anyone know what this wire is for? I cant find it in any diagram anywhere. Thanks!
One wire I ran into is on the plug for the park/neutral switch. the last pin is labeled "crank voltage" and is circuit 639. Goes back to the fuse box. Anyone know what this wire is for? I cant find it in any diagram anywhere. Thanks!
Staging Lane
Joined: Feb 2019
Posts: 72
Likes: 13
