Wiring Harness
08-18-2002, 03:57 PM
#1
TECH Junkie
Thread Starter
iTrader: (4)
Join Date: Jul 2002
Location: Atlanta, Georgia!
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Wiring Harness I am putting a 99 LS1/T56 into a Classic Roadsters Sebring MX. I need to rework the harness to fit my application. I would like to do the work myself but I'm having a problem finding enough documentation on the harness and computer to do the job. I know the pinouts from the computer but thats about it. Can anybody from this board help me find the doc's I need to do the job?
Dale
Dale
08-19-2002, 01:19 PM
#2
Re: Wiring Harness </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif"> I know the pinouts from the computer but thats about it. </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">What more do you need? You should be able to wire everything up with this data.
08-19-2002, 05:31 PM
#3
TECH Junkie
Thread Starter
iTrader: (4)
Join Date: Jul 2002
Location: Atlanta, Georgia!
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wiring Harness Well I'm just not sure about stuff like wiring in a fuel pump relay, Should I just use the hot from the computer to ground our should I use the computer ground? Same for the cooling fans, and the ODBII connector pinout (my harness is missing some connectors) etc... so I was just wondering if there is a comprehensive wiring diagram in one of the shop manuals.
08-20-2002, 05:58 PM
#5
TECH Junkie
Thread Starter
iTrader: (4)
Join Date: Jul 2002
Location: Atlanta, Georgia!
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wiring Harness Thanks Jeff, I went last night to the Helm website and saw it on there for 150.00. At least I assume that's it. I try a local dealer first.
