Conversion folks please list your conversion in here
01-30-2005, 09:15 AM
#261
Staging Lane
Join Date: Oct 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
1999 LS1 with a Porsche 915 in a 2000 Lamborghini Diablo Roaster with a custom built chasse.
John
www.jtm311.com
John
www.jtm311.com 
02-06-2005, 03:33 PM
#262
Restricted User
iTrader: (35)
Join Date: Dec 2004
Location: Hanover PA
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
76 LS1-M6 Firebird I had a wrecked 99 Z-28 30k for parts car
used front clip with R&P-& front suspension
stock 99 motor & trans mounts
C5 front brakes with laser cut brackets
working ABS--98 rear axle- VBP composite springs
99 dash, console, f seats, alarm & remote work
airbags,AC,CC
battery in trunk- 6 point roll bar
1st place SLP fall show
stock tank with 99 pump & baffle inside
All wiring from 99
true 2.5 duals & flowmaster
out of 570 firebirds at TA nats I had
the only 76 formula hood
picture
used front clip with R&P-& front suspension
stock 99 motor & trans mounts
C5 front brakes with laser cut brackets
working ABS--98 rear axle- VBP composite springs
99 dash, console, f seats, alarm & remote work
airbags,AC,CC
battery in trunk- 6 point roll bar
1st place SLP fall show
stock tank with 99 pump & baffle inside
All wiring from 99
true 2.5 duals & flowmaster
out of 570 firebirds at TA nats I had
the only 76 formula hood
picture
Last edited by 76LS1BIRD; 02-13-2005 at 11:45 AM. Reason: adding things
02-10-2005, 02:10 PM
#264
Teching In
Join Date: Feb 2005
Location: left coast
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
'32 Chevy 5-window coupe
2002 LM7 w/ LS6 intake
trying to make a 200R4 work
(any helpful hints would be appreciated)
'69 Camaro 12-bolt
car is still in project stage
2002 LM7 w/ LS6 intake
trying to make a 200R4 work
(any helpful hints would be appreciated)
'69 Camaro 12-bolt
car is still in project stage
02-16-2005, 05:50 PM
#266
Geez after reading this thread through I have learned some humility. The creativity of some of these conversions is astounding. I have a 85 Porsche 944 that really could use some reliable power. Initially I was going to an LT1 but the reduced weight of the LS plus that it is an incredible engine makes it a great candidate for this fine little car.
02-22-2005, 10:37 AM
#267
TECH Resident
Originally Posted by wingman
'32 Chevy 5-window coupe
2002 LM7 w/ LS6 intake
trying to make a 200R4 work
(any helpful hints would be appreciated)
'69 Camaro 12-bolt
car is still in project stage
2002 LM7 w/ LS6 intake
trying to make a 200R4 work
(any helpful hints would be appreciated)
'69 Camaro 12-bolt
car is still in project stage
Art Carr is supposed to be the TH200r4 guru, I think Super Chevy just had a great article on that trans, it can me made to work well I'm told
02-27-2005, 09:04 PM
#268
TECH Resident
Join Date: Oct 2004
Location: TAMPA by way of MIAMI!!!
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
I'm planning on doing the old S-10 conversion leaning towards an LS2 but might just do an LS6 instead. Right now I'm setting up the suspension and brakes. And then I'm gonna do the old M/C and I'm thinking an LS7, what the hell right? Gotta do the Blazer X first. I got the whole suspension on the way and the 18" Boyds then I'm gonna upgrade the rear (8.5" 10 bolt) and then do 13" ssbc fronts and leave the stock 12" discs in back.
Last edited by firefighter; 02-27-2005 at 09:10 PM.
02-28-2005, 03:57 AM
#269
Launching!
iTrader: (2)
Join Date: Oct 2002
Location: Indy, IN
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by firefighter
I'm planning on doing the old S-10 conversion leaning towards an LS2 but might just do an LS6 instead. Right now I'm setting up the suspension and brakes. And then I'm gonna do the old M/C and I'm thinking an LS7, what the hell right? Gotta do the Blazer X first. I got the whole suspension on the way and the 18" Boyds then I'm gonna upgrade the rear (8.5" 10 bolt) and then do 13" ssbc fronts and leave the stock 12" discs in back.
02-28-2005, 11:49 PM
#270
Porsche 944 ls-1 added to the list:
http://www.renegadehybrids.com/LS-1/...ersionkit.html
It's my car, but I am certainly a very happy customer of Renegade Hybrids.
Steve
http://www.renegadehybrids.com/LS-1/...ersionkit.html
It's my car, but I am certainly a very happy customer of Renegade Hybrids.
Steve
03-10-2005, 09:58 PM
#272
Teching In
Join Date: Dec 2004
Location: Winchester, California
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I am still learning so I'm not actually doing the build. A buddy of mine will be doing most of the work for me. This thing should be finished some time in the end of April or the beginning of May of this year (2005). It's gonna be sick. The only thing that's holding me up is the sale of my Eclipse. That's where my money is right now. If I could get it sold I could start with the major build.
1) 1990 Mazda Miata
2) 2002 LS1, Comp cam281/283 .571/.573 112, Mallet 5.3L Stage II heads, Manley 2.02/1.57, 918 springs, titanium retainers, B&B Route 66, M6 T56, Getrag 3.42, Kirban shifter, Alum flywheel, SLP oil pump, Rollmaster DR, 160 degree thermostat.
3) No pictures of the build but I have a little cardomain site. Not much on there right now. My MX-C5
1) 1990 Mazda Miata
2) 2002 LS1, Comp cam281/283 .571/.573 112, Mallet 5.3L Stage II heads, Manley 2.02/1.57, 918 springs, titanium retainers, B&B Route 66, M6 T56, Getrag 3.42, Kirban shifter, Alum flywheel, SLP oil pump, Rollmaster DR, 160 degree thermostat.
3) No pictures of the build but I have a little cardomain site. Not much on there right now. My MX-C5
03-12-2005, 08:23 AM
#273
Teching In
Join Date: Feb 2004
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Ebay Miata LS1 This was listed on Ebay last week and did not meet the reserve. Looks like it is a very nice conversion.
http://www.miatavette.com/
http://www.miatavette.com/
03-12-2005, 02:58 PM
#274
conversion of a 69 camaro to an Ls motor Hi I'm new here.
I'm looking for info. on putting in an Ls6 motor into a 69 camaro. Presently I have a 302 SBC with a Tremec 5 speed. MSD ignition system.
anov@ skylinc.net
I'm looking for info. on putting in an Ls6 motor into a 69 camaro. Presently I have a 302 SBC with a Tremec 5 speed. MSD ignition system.
anov@ skylinc.net
Last edited by vmc; 03-12-2005 at 03:01 PM. Reason: Forgot email address
03-20-2005, 09:22 PM
#276
Launching!
iTrader: (5)
Join Date: May 2003
Location: Austin, Texas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
I haven't exactly started them yet but I've got a '56 Belair, '57 Belair, and a '66 Chevy truck that will be getting LS1 swaps when I leanr more about all the details
03-25-2005, 01:54 PM
#277
Teching In
Join Date: Mar 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1st Gen Blazer Hi everyone, I'm in the process of putting C4 IFS & IRS under my Blazer. The suspensions and frame are setup on my jig and just need to be aligned. Plans call for a LS/X M6 combination along with a few body mods . Looking forward to
getting alot of info here ( and giving when I can ) . If anyone is doing or has done this conversion let me know ( I got ???? ) and some answers . Thanks
Ken
getting alot of info here ( and giving when I can ) . If anyone is doing or has done this conversion let me know ( I got ???? ) and some answers . Thanks
Ken
03-25-2005, 08:33 PM
#278
Staging Lane
iTrader: (3)
Join Date: Mar 2005
Location: Mankato, Minnesota
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
1964 Chevy C-10 big-window shortbed fleetside
Donor: '99 Z28 LS1 + T56
http://www.LS1C10.com/
Just received the new drivetrain today and have a LONG way to go before completion, but it's a start....
Donor: '99 Z28 LS1 + T56
http://www.LS1C10.com/
Just received the new drivetrain today and have a LONG way to go before completion, but it's a start....
Last edited by brossow; 03-26-2005 at 07:39 AM.
03-27-2005, 12:03 PM
#279
Teching In
Join Date: Mar 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ls1 s10 im getting ready to start a 1988 2wd s10/LS1, 4l60 transformation in the next 2 weeks...........so if any one has any info on problems I might and probably will run into to let me no before hand i would like to here it
thanks
thanks
