1999 LS1 with a Porsche 915 in a 2000 Lamborghini Diablo Roaster with a custom built chasse.

John www.jtm311.com

 

I had a wrecked 99 Z-28 30k for parts car
used front clip with R&P-& front suspension
stock 99 motor & trans mounts
C5 front brakes with laser cut brackets
working ABS--98 rear axle- VBP composite springs
99 dash, console, f seats, alarm & remote work
airbags,AC,CC
battery in trunk- 6 point roll bar
1st place SLP fall show
stock tank with 99 pump & baffle inside
All wiring from 99
true 2.5 duals & flowmaster
out of 570 firebirds at TA nats I had
the only 76 formula hood

picture

 

72 Chevelle
2003 6.0l LQ4 ith 2wd 4l80e tranny
Defi gauges
BRP mounts

Not in yet, hopefully by summer.

-Matt

 

'32 Chevy 5-window coupe
2002 LM7 w/ LS6 intake
trying to make a 200R4 work
(any helpful hints would be appreciated)
'69 Camaro 12-bolt
car is still in project stage

 

68 lemans convertable 6.0 4l80e

 

Geez after reading this thread through I have learned some humility. The creativity of some of these conversions is astounding. I have a 85 Porsche 944 that really could use some reliable power. Initially I was going to an LT1 but the reduced weight of the LS plus that it is an incredible engine makes it a great candidate for this fine little car.

 

Art Carr is supposed to be the TH200r4 guru, I think Super Chevy just had a great article on that trans, it can me made to work well I'm told

 

I'm planning on doing the old S-10 conversion leaning towards an LS2 but might just do an LS6 instead. Right now I'm setting up the suspension and brakes. And then I'm gonna do the old M/C and I'm thinking an LS7, what the hell right? Gotta do the Blazer X first. I got the whole suspension on the way and the 18" Boyds then I'm gonna upgrade the rear (8.5" 10 bolt) and then do 13" ssbc fronts and leave the stock 12" discs in back.

 

Keep in mind, the stock booster probably wont clear the GEN3/4 motor. I am going Hydroboost on my truck with a similar conversion.......

 

Porsche 944 ls-1 added to the list:

http://www.renegadehybrids.com/LS-1/...ersionkit.html

It's my car, but I am certainly a very happy customer of Renegade Hybrids.

Steve

 

62 corvette w/ Newman Carcreations frame conversion, C4 suspension and brakes.
LS1/ T56

 

I am still learning so I'm not actually doing the build. A buddy of mine will be doing most of the work for me. This thing should be finished some time in the end of April or the beginning of May of this year (2005). It's gonna be sick. The only thing that's holding me up is the sale of my Eclipse. That's where my money is right now. If I could get it sold I could start with the major build.

1) 1990 Mazda Miata

2) 2002 LS1, Comp cam281/283 .571/.573 112, Mallet 5.3L Stage II heads, Manley 2.02/1.57, 918 springs, titanium retainers, B&B Route 66, M6 T56, Getrag 3.42, Kirban shifter, Alum flywheel, SLP oil pump, Rollmaster DR, 160 degree thermostat.

3) No pictures of the build but I have a little cardomain site. Not much on there right now. My MX-C5

 

This was listed on Ebay last week and did not meet the reserve. Looks like it is a very nice conversion.

http://www.miatavette.com/

 

Hi I'm new here.

I'm looking for info. on putting in an Ls6 motor into a 69 camaro. Presently I have a 302 SBC with a Tremec 5 speed. MSD ignition system.

anov@ skylinc.net

 

I just baught a 1967 chevelle and am in the market for an LS1 with a 6 speed. Can anyone help me out in this manner

 

I haven't exactly started them yet but I've got a '56 Belair, '57 Belair, and a '66 Chevy truck that will be getting LS1 swaps when I leanr more about all the details

 

Hi everyone, I'm in the process of putting C4 IFS & IRS under my Blazer. The suspensions and frame are setup on my jig and just need to be aligned. Plans call for a LS/X M6 combination along with a few body mods . Looking forward to
getting alot of info here ( and giving when I can ) . If anyone is doing or has done this conversion let me know ( I got ???? ) and some answers . Thanks

Ken

 

1964 Chevy C-10 big-window shortbed fleetside
Donor: '99 Z28 LS1 + T56
http://www.LS1C10.com/

Just received the new drivetrain today and have a LONG way to go before completion, but it's a start....

 

im getting ready to start a 1988 2wd s10/LS1, 4l60 transformation in the next 2 weeks...........so if any one has any info on problems I might and probably will run into to let me no before hand i would like to here it

thanks

 

Not to wild of a conversion but it is one!

03' Ext Cab Silverado originally with 4.8 now LS1(02') with mods below!