Conversion folks please list your conversion in here
#142
57 Chevy Belair w/Newman conversion
I'm planning on a Paul Newman conversion with eithier an LS1/4L60E or LS6/4L65E combo-waiting patiently for the LS6 crate motor to come out with a computer and wiring harness pkge like they did with the LS1.If anyone has any info on when GM will do this-let me know.
#143
Originally Posted by 57 Bel-air Vette
I'm planning on a Paul Newman conversion with eithier an LS1/4L60E or LS6/4L65E combo-waiting patiently for the LS6 crate motor to come out with a computer and wiring harness pkge like they did with the LS1.If anyone has any info on when GM will do this-let me know.
http://www.sdpc2000.com/cart.asp?act...=120&pid=92859
#144
Car: 1953 Studebaker Commander Coupe
Engine: Lingenfelter ASA-spec LS1, 440 hp, 427 lbs/ft, T56 6-speed
link:http://nelson-motorsports.com/studebaker.htm
The "5%" mods...It will look close to stock until you look close up..lots of detail work and new technology. Art Morrison Profile frame, Wilwood 4-pots, Ford 9-inch from Strange, yada yada yada
Engine: Lingenfelter ASA-spec LS1, 440 hp, 427 lbs/ft, T56 6-speed
link:http://nelson-motorsports.com/studebaker.htm
The "5%" mods...It will look close to stock until you look close up..lots of detail work and new technology. Art Morrison Profile frame, Wilwood 4-pots, Ford 9-inch from Strange, yada yada yada
#145
Car: 1979 Chevy Impala (see sig)
Engine/Trans: 1999 LS1 and T56 from Z28
I just took possession of the donor car and have yet to remove the drivetrain. Car was a rollover and still drives, so its going to be really hard to rip the life from it! Due to lack of funds at the current moment, I will have to wait until next winter before I get a good start on things. This is ok, because already I have learned so much from this forum, I should have all the information I'll need by the time the swap actually takes place! Its amazing...when I first thought of doing this project, I thought for sure I was the only one in the country to attempt an LS1 swap into an older vehicle. Boy, was I wrong!! Thanks guys for the great site and I'm sure you'll be seeing more of me asking stupid questions as the project progresses!
Engine/Trans: 1999 LS1 and T56 from Z28
I just took possession of the donor car and have yet to remove the drivetrain. Car was a rollover and still drives, so its going to be really hard to rip the life from it! Due to lack of funds at the current moment, I will have to wait until next winter before I get a good start on things. This is ok, because already I have learned so much from this forum, I should have all the information I'll need by the time the swap actually takes place! Its amazing...when I first thought of doing this project, I thought for sure I was the only one in the country to attempt an LS1 swap into an older vehicle. Boy, was I wrong!! Thanks guys for the great site and I'm sure you'll be seeing more of me asking stupid questions as the project progresses!
#146
Unlikely conversion
'00 Isuzu Vehicross Ironman Edition...
2000 Camaro Z/28 LS1, 4L60E, and all that goes with it...
Plan to retain Borg Warner Torque On Deman system and all other electronics...
Havin' fun working on it...
2000 Camaro Z/28 LS1, 4L60E, and all that goes with it...
Plan to retain Borg Warner Torque On Deman system and all other electronics...
Havin' fun working on it...
#147
90 Jeep Cherokee 4wd
Currently 93 LT1/700r4. Minor bolt ons
Soon to be 99LS1-with a little something extra. Bolted to the 700r4.
lt1xj@mchsi.com
Currently 93 LT1/700r4. Minor bolt ons
Soon to be 99LS1-with a little something extra. Bolted to the 700r4.
lt1xj@mchsi.com
#148
LS1 Porsche
1) Vehicle receiving the swap
2) Your new combo, LS1; A4 or M6, etc.
3) Link to pics if you have any
Supercharged LS1 Porsche 911
Porsche Transmission
Check it out www.toy-jet.ls1fun.com
2) Your new combo, LS1; A4 or M6, etc.
3) Link to pics if you have any
Supercharged LS1 Porsche 911
Porsche Transmission
Check it out www.toy-jet.ls1fun.com
#149
59 corvette
SRIII chassis
LS1 engine, 4L60E trans
C4 front and rear suspension
http://www.villagephotos.com/pubbrow...elected=434006
Regards, John McGraw
SRIII chassis
LS1 engine, 4L60E trans
C4 front and rear suspension
http://www.villagephotos.com/pubbrow...elected=434006
Regards, John McGraw
#150
69 Camaro w/ LS1
I have been working on it for awhile and hoping for a Sept 04 completion date. Should be in paint by April.
69 camaro with LS1/T56 will be a head/cam motor with a TNT set-up. The front suspension is a DSE coilover set up. 12 bolt with 3.73 and will be running a spec 3 clutch.
69 camaro with LS1/T56 will be a head/cam motor with a TNT set-up. The front suspension is a DSE coilover set up. 12 bolt with 3.73 and will be running a spec 3 clutch.
#154
1980 280ZX, Dragnzx Project
My first project:
1980 280 ZX LS1 (some planned modifications), with M6 transmission.
Dragnzx
My webpage is under construction and not complete, having a few problems with the software. I have enough there to see what is going on with the project. My email is <a href="mailto:genesis0503@msn.com...3@msn.com</a>
1980 280 ZX LS1 (some planned modifications), with M6 transmission.
Dragnzx
My webpage is under construction and not complete, having a few problems with the software. I have enough there to see what is going on with the project. My email is <a href="mailto:genesis0503@msn.com...3@msn.com</a>
Last edited by dragnzx; 02-16-2004 at 11:29 AM. Reason: changed URL
#155
Finally finished my LS1 swap, began in December and turned the key beginning of Feb. Pics of the swap in progress are at http://www.warpten.com/carpics/ls1/
It runs great, had to delete a *lot* of diag codes to keep the check engine light off and I'm controlling both cooling fans with the "High Speed Fan" driver on the PCM for now. Other than that, it's in and happy.
It runs great, had to delete a *lot* of diag codes to keep the check engine light off and I'm controlling both cooling fans with the "High Speed Fan" driver on the PCM for now. Other than that, it's in and happy.
#157
'96 Z28 w/Turbo 350 tanny
www.taekwondoplus.org/z28/m6_to_th350_swap.htm
(coming soon: Ford 8.8 hybrid. Within the next 2 weeks)
www.taekwondoplus.org/z28/m6_to_th350_swap.htm
(coming soon: Ford 8.8 hybrid. Within the next 2 weeks)
#160
1992 GMC Typhoon.
(Alot of HP, and ALL the traction)
LS1 (converted to LS6), Turbo'd A2A intercooled.
Prolly 4L80e trans and retaining AWD
*what am I doing ? I need my head examined*
Website is coming slowly...
www.turbols6.com
(Alot of HP, and ALL the traction)
LS1 (converted to LS6), Turbo'd A2A intercooled.
Prolly 4L80e trans and retaining AWD
*what am I doing ? I need my head examined*
Website is coming slowly...
www.turbols6.com