exhaust manifold help
Thread Starter
Teching In
Joined: Jan 2004
Posts: 7
Likes: 0
exhaust manifold help I need an exhaust manifold that looks like the passinger side of a 98 Pontiac LS1 to bolt on the drivers side on a 98 LS1. My steering geer is in the way of the stock manifold so I have to exit the exhaust on a 45 degree off of #7 going down the firewall.
TECH Addict
Joined: Jun 2005
Posts: 2,660
Likes: 14
From: England
I assume this isn't an Fbody or Vette then??
I have no idea but can you simple use the passenger side manifold or adapt it. I mean it's not probably a common request so I would be suprised if there's an off the shelf solution.
I have no idea but can you simple use the passenger side manifold or adapt it. I mean it's not probably a common request so I would be suprised if there's an off the shelf solution.
TECH Resident
Joined: Oct 2004
Posts: 800
Likes: 1
From: Simi VAlley,CA
I've posted this before but this is my left side. As far as a GM part is concerned, it is probably close to what you need. If this won't get it done, you'll need to do something like Pat is doing for his Stude'.
Oh yeah...this is 1997 Y body, first design "sheet metal" manifold
Oh yeah...this is 1997 Y body, first design "sheet metal" manifold
Last edited by Oscar Will; Feb 16, 2006 at 08:59 AM. Reason: add info
Take a look at the truck manifold. It is a log type similar to the passenger's Camaro, but dumps a little further back. I don't have a picture, but you should be able to find one on here.
Originally Posted by Oscar Will
I've posted this before but this is my left side. As far as a GM part is concerned, it is probably close to what you need. If this won't get it done, you'll need to do something like Pat is doing for his Stude'.
Oh yeah...this is 1997 Y body, first design "sheet metal" manifold
Oh yeah...this is 1997 Y body, first design "sheet metal" manifold
I think these are actually stainless, aren't they?
Anyway, I have an extra set. PM if interested. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by kwrosa
I need an exhaust manifold that looks like the passinger side of a 98 Pontiac LS1 to bolt on the drivers side on a 98 LS1. My steering geer is in the way of the stock manifold so I have to exit the exhaust on a 45 degree off of #7 going down the firewall.
https://ls1tech.com/forums/conversions-swaps/444278-manifold-photos.html
Ken