LS1 into a Vauxhall Astra Coupe
#82
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Yellowbrother
oh snap...thas some major reengineering...no room for radiator and fan???
#84
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pete...
Are you aware the GTO shifter you are using, is the furthest back location available.
Camaro T56 sits about 3" further foward, and the Viper sits on the other square plate on the top of the trans, about 6" further forward again.
I only mention, as it looks like the stick will sit pretty far back in the car ( or perhaps thats what you want ? )
I have a standard Camaro shifter here if you wanted to try it. FOC.
Are you aware the GTO shifter you are using, is the furthest back location available.
Camaro T56 sits about 3" further foward, and the Viper sits on the other square plate on the top of the trans, about 6" further forward again.
I only mention, as it looks like the stick will sit pretty far back in the car ( or perhaps thats what you want ? )
I have a standard Camaro shifter here if you wanted to try it. FOC.
#85
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes Stevie, was gonna ask the question about a Ripshifter, from Aus, I think it was in a group buy on here a while back.
Thanks mate, I`ll take you up on the offer of the Camaro one if that`s ok.
PM sent
Thanks mate, I`ll take you up on the offer of the Camaro one if that`s ok.
PM sent
#86
Teching In
Join Date: Aug 2005
Location: Under your bed
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow, I just this on some other forums and I know they are all i-net wrench monkys with comments like "ricer!"
fk them!
this is suuuuuuuuuuper nice!
I would rock out in it.
fk them!
this is suuuuuuuuuuper nice!
I would rock out in it.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#87
TECH Enthusiast
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi Pete1 outstanding work....love it.
I have some questions about what you are doing?
What kind of mods have you done to the firewall, and transmission/driveshaft tunnel to make it fit?
how about mouting the engine? I know the previous engine was a transverse mount. How did you go about adapting the LS1 in there.
My next project is going to be a FWD to RWD with a LS1. I was looking at the engine bay yesterday and wondering about the ??? above
I guess I should have read the thread before posting......found the answers to the questions.....This is great inspiration for my next project....woooot!!!
cheers
I have some questions about what you are doing?
What kind of mods have you done to the firewall, and transmission/driveshaft tunnel to make it fit?
how about mouting the engine? I know the previous engine was a transverse mount. How did you go about adapting the LS1 in there.
My next project is going to be a FWD to RWD with a LS1. I was looking at the engine bay yesterday and wondering about the ??? above
I guess I should have read the thread before posting......found the answers to the questions.....This is great inspiration for my next project....woooot!!!
cheers
Last edited by Schitzo; 06-08-2006 at 09:35 AM.
#91
TECH Resident
iTrader: (2)
Join Date: Jan 2006
Location: Myrtle Beach, SC
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I like it.
No one would ever expect that car to be that fast. If I raced that car from a stoplight and lost, it would ruin my day. Until I found out it had a REAL engine in it.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
No one would ever expect that car to be that fast. If I raced that car from a stoplight and lost, it would ruin my day. Until I found out it had a REAL engine in it.
#92
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2003
Location: Phoenix AZ
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice work!
Where did you get the square tube bent at?
I like how you steered it past the oil pan with just one piece, not 3.
Cant wait to see the trans tunnel sheet metal.
This project rocks!
Where did you get the square tube bent at?
I like how you steered it past the oil pan with just one piece, not 3.
Cant wait to see the trans tunnel sheet metal.
This project rocks!
#93
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Gen3Benz
Nice work!
Where did you get the square tube bent at?
I like how you steered it past the oil pan with just one piece, not 3.
Cant wait to see the trans tunnel sheet metal.
This project rocks!
Where did you get the square tube bent at?
I like how you steered it past the oil pan with just one piece, not 3.
Cant wait to see the trans tunnel sheet metal.
This project rocks!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
The square tube, we just passed it thru the rolls a few times.
#95
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by homegrown TA
update?
![](http://img.photobucket.com/albums/v368/Pete123/CopyofEngineandGboxinstallation.jpg)
Need to source a pair of tubular headers, but unsure which ones to go for ?
Then fabricate the complete exhaust, to make enough room before the tunnel is fabricated, so progress will slow down for a while.
#97
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 11secproject
Very impressive man!! Not sure what headers could possibly work. You may want to design your own...
or these ... http://www.machperformanceparts.com/mp/30161.html
#99
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got a set of headers from Street and perfromance that were close to what I needed. Had them just tack weld the pipes to the flanges. Modified one pipe on each header welded them up and sent them to Jet-Hot.
S&P will also sell you one header rather than a set so you can get one of one type for one side and another for the other.
S&P will also sell you one header rather than a set so you can get one of one type for one side and another for the other.
#100
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Schitzo
you are on a flippin roll.....when do you think she is gonna fire?