Steve68's Camaro.
#82
TECH Fanatic
iTrader: (23)
Pics of the ATS mounts and trans x member, this crossmember has been modified, I cut off the original pad and had another one made, this allows me to put the crossmember in the stock location on the subframe, not foward like ATS wanted, FYI,
Last edited by Steve68; 01-10-2011 at 06:06 AM.
#90
TECH Fanatic
iTrader: (23)
MLK day update, actually off work! first time in 23 yrs, work contract no fed holidays off, no big deal,
so this weekend, cleaned the heads, there now spotless, and now I can tell they've had some port work to them, exhaust side, bowl and light intake work,
intake and throttle body also spotless, installed new gaskets,
picked up some new lifter trays from the dealer, much nicer than my low milage originals, so todays a good day for some garage work, also raining,
still have to clean up the head gaskets,
maybe some small pics later,
oh ya, heres a great one, piced up the Vintage Air kit on Friday, and its the wrong one for a 69 non ac car mine a 68 ac car, looks like I'm going to by pass the parts guy, call VA direct.....
so this weekend, cleaned the heads, there now spotless, and now I can tell they've had some port work to them, exhaust side, bowl and light intake work,
intake and throttle body also spotless, installed new gaskets,
picked up some new lifter trays from the dealer, much nicer than my low milage originals, so todays a good day for some garage work, also raining,
still have to clean up the head gaskets,
maybe some small pics later,
oh ya, heres a great one, piced up the Vintage Air kit on Friday, and its the wrong one for a 69 non ac car mine a 68 ac car, looks like I'm going to by pass the parts guy, call VA direct.....
#92
TECH Fanatic
iTrader: (23)
here's some clean parts, need my torque wrench to assemble but its out being used right now, friends car, last night went through the garage to find all my parts, rockers, alternator and bracket, a/c bracket, powersteering pump and lines, so I guess next week will be finally assembly,
and the final product, minus a lot of torquing!!!
Last night I felt like I've had a ton of progress completed, I'm pretty sure I have everything!
and the final product, minus a lot of torquing!!!
Last night I felt like I've had a ton of progress completed, I'm pretty sure I have everything!
Last edited by Steve68; 01-23-2011 at 10:27 AM.
#97
TECH Fanatic
iTrader: (23)
Yes, on the move, spent the day cleaning up the garage/car, tomorrow the Chris Alston G Link and the VA kits should be delivered, I'm prepping the car to start cutting for the minitubs, which I've been talking about for weeks, and all I have to do is cut the trunk area, but the cars still/was packed with stuff and parts,
Last edited by Steve68; 01-23-2011 at 08:18 PM.